Over-Voltage Protection Load Switch
AW32705/AW32710
Oct. 2018 V1.0
Over-Voltage Protection Load Switch with Surge Protection
FEATURES
GENERAL DESCRIPTION...
Description
AW32705/AW32710
Oct. 2018 V1.0
Over-Voltage Protection Load Switch with Surge Protection
FEATURES
GENERAL DESCRIPTION
Surge protection
The AW327XX family OVP load switch features
IEC 61000-4-5: > 100V Integrated low Rdson nFET switch: typical 24mΩ
surge protection, an internal clamp circuit protects the device from surge voltages up to 100V.
l
5A continuous current capability Default Over-Voltage Protection (OVP) threshold
AW32705: 6.8V AW32710: 10.5V OVP threshold adjustable range: 4V to 20V
tia The AW327XX features an ultra-low 24mΩ (typ.)
Rdson nFET load switch. When input voltage exceeds the OVP threshold, the switch is turned off very fast to prevent damage to the protected downstream devices. The IN pin is capable of
Input system ESD protection IEC 61000-4-2 Contact discharge: ±8kV
n withstanding fault voltages up to 35VDC.
The default OVP threshold is 6.8V (AW32705) and
IEC 61000-4-2 Air gap discharge: ±15kV Input maximum voltage rating: 35VDC
e Fast turn-off response: typical 50ns
Over-Temperature Protection (OTP) Under-Voltage Lockout (UVLO)
d WLCSP 1.17×1.57-12B package fi APPLICATIONS
Smartphones
n Tablets o Charging Ports
10.5V (AW32710), the OVP threshold can be adjusted from 4V to 20V through external OVLO pin.
The device features an open-drain output ACOK, when VIN_UVLO < VIN < VIN_OVLO and the switch is on, ACOK will be driven low to indicate a good power input, otherwise it is high impedance.
This device fea...
Similar Datasheet