Single-Ended Multiplexer. 83052I-01 Datasheet

83052I-01 Multiplexer. Datasheet pdf. Equivalent

83052I-01 Datasheet
Recommendation 83052I-01 Datasheet
Part 83052I-01
Description Single-Ended Multiplexer
Feature 83052I-01; 2-Bit, 2:1, Single-Ended Multiplexer 83052I-01 Datasheet General Description The 83052I-01 is a 2-.
Manufacture Renesas
Datasheet
Download 83052I-01 Datasheet




Renesas 83052I-01
2-Bit, 2:1, Single-Ended Multiplexer
83052I-01
Datasheet
General Description
The 83052I-01 is a 2-bit, 2:1, Single-ended Multiplexer and a
member of the family of High Performance Clock Solutions from
IDT. The 83052I-01 has two selectable single-ended clock inputs
and two single-ended clock outputs. The output has a VDDO pin
which may be set at 3.3V, 2.5V, or 1.8V, making the device ideal for
use in voltage translation applications. An output enable pin
places the output in a high impedance state which may be useful
for testing or debug. Possible applications include systems with up
to two transceivers which need to be independently set for
different rates. For example, a board may have two transceivers,
each of which need to be independently configured for 1 Gigabit
Ethernet or 1 Gigabit Fibre Channel rates. Another possible
application may require the ports to be independently set for FEC
(Forward Error Correction) or non-FEC rates. The device operates
up to 250MHz and is packaged in a 16 TSSOP.
Features
2-bit, 2:1 single-ended multiplexer
Nominal output impedance: 15(VDDO = 3.3V)
Maximum output frequency: 250MHz
Propagation delay: 3ns (maximum), VDD = VDDO = 3.3V
Input skew: 85ps (maximum), VDD = VDDO = 3.3V
Part-to-part skew: 500ps (maximum), VDD = VDDO = 3.3V
Output skew: 65ps (maximum), VDD = VDDO = 3.3V
Additive phase jitter, RMS (12KHz - 20MHz):
0.15ps (typical)
Operating supply modes:
VDD/VDDO
3.3V/3.3V
3.3V/2.5V
3.3V/1.8V
2.5V/2.5V
2.5V/1.8V
-40°C to 85°C ambient operating temperature
Available in lead-free (RoHS 6) package
Block Diagram
SEL0 Pulldown
CLK0 Pulldown
0
Q0
CLK1 Pulldown
1
0
Q1
1
SEL1 Pulldown
OE Pullup
©2015 Integrated Device Technology, Inc
1
Pin Assignment
nc 1
VDDO 2
nc 3
GND 4
Q1 5
SEL1 6
CLK1 7
VDD 8
16 nc
15 VDDO
14 nc
13 GND
12 Q0
11 SEL0
10 CLK0
9 OE
83052I-01
16-Lead TSSOP
4.4mm x 5.0mm x 0.925mm
package body
G Package
December 16, 2015



Renesas 83052I-01
83052I-01 Datasheet
Table 1. Pin Descriptions
Number
1, 3, 14, 16
2, 15
4, 13
5, 12
6, 11
7, 10
8
9
Name
nc
VDDO
GND
Q1, Q0
SEL1, SEL0
CLK1, CLK0
VDD
OE
Type
Unused
Power
Power
Output
Input Pulldown
Input
Power
Pulldown
Input
Pullup
Description
No connect.
Output supply pins.
Power supply ground
Single-ended clock outputs. LVCMOS/LVTTL interface levels.
Clock select inputs. See Table 3, Control Input Function Table.
LVCMOS / LVTTL interface levels.
Single-ended clock input. LVCMOS/LVTTL interface levels.
Power supply pin.
Output enable. When LOW, outputs are in HIGH impedance state. When
HIGH, outputs are active. LVCMOS / LVTTL interface levels.
NOTE: Pullup and Pulldown refer to internal input resistors. See Table 2, Pin Characteristics, for typical values.
Table 2. Pin Characteristics
Symbol
CIN
RPULLUP
RPULLDOWN
Parameter
Input Capacitance
Input Pullup Resistor
Input Pulldown Resistor
CPD
Power Dissipation Capacitance
(per output); NOTE 1
ROUT
Output Impedance
Test Conditions
VDDO = 3.465V
VDDO = 2.625V
VDDO = 2.0V
VDDO = 3.465V
VDDO = 2.625V
VDDO = 2.0V
Minimum
Typical
4
51
51
18
19
19
15
17
25
Maximum
Units
pF
k
k
pF
pF
pF
Function Tables
Table 3. Control Input Function Table
Control Inputs
SEL1
SEL0
0
0
0
1
1
0
1
1
Outputs
Q0
Q1
CLK0 (default)
CLK0
CLK1
CLK0
CLK0
CLK1
CLK1
CLK1
©2015 Integrated Device Technology, Inc
2
December 16, 2015



Renesas 83052I-01
83052I-01 Datasheet
Absolute Maximum Ratings
NOTE: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond
those listed in the DC Characteristics or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect product reliability.
Item
Supply Voltage, VCC
Inputs, VI
Outputs, VO
Package Thermal Impedance, JA
Storage Temperature, TSTG
Rating
4.6V
-0.5V to VDD + 0.5V
-0.5V to VDDO+ 0.5V
100.3C/W (0 mps)
-65C to 150C
DC Electrical Characteristics
Table 4A. Power Supply DC Characteristics, VDD = 3.3V ± 5%, VDDO = 3.3V ± 5% or 2.5V ± 5% or 1.8V ± 0.2V,
TA = -40°C to 85°C
Symbol Parameter
Test Conditions
Minimum
Typical Maximum
VDD
Positive Supply Voltage
3.135
3.135
3.3
3.465
3.3
3.465
VDDO
Output Supply Voltage
2.375
1.6
2.5
2.625
1.8
2.0
IDD
Power Supply Current
40
IDDO
Output Supply Current
No Load
5
Units
V
V
V
V
mA
mA
Table 4B. Power Supply DC Characteristics, VDD = 2.5V ± 5%, VDDO = 2.5V ± 5% or 1.8V ± 0.2V, TA = -40°C to 85°C
Symbol Parameter
Test Conditions
Minimum
Typical Maximum Units
VDD
VDDO
Positive Supply Voltage
Output Supply Voltage
2.375
2.375
1.6
2.5
2.625
V
2.5
2.625
V
1.8
2.0
V
IDD
Power Supply Current
IDDO
Output Supply Current
No Load
40
mA
5
mA
©2015 Integrated Device Technology, Inc
3
December 16, 2015







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)