GBW Rail-to-Rail I/O Operational Amplifier
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LM6152, LM6154
SNOS752E – MAY ...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LM6152, LM6154
SNOS752E – MAY 1999 – REVISED SEPTEMBER 2014
LM6152/LM6154 Dual and Quad 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
1 Features
1 At VS = 5V, typical unless noted. Greater than Rail-to-rail Input CMVR −0.2 5V to
5.25 V Rail-to-rail Output Swing 0.01 V to 4.99 V Wide Gain-bandwidth 75 MHz @ 100 kHz Slew Rate
– Small Signal 5 V/µs – Large Signal 45 V/µs Low Supply Current 1.4 mA/amplifier Wide Supply Range 2.7 V to 24 V Fast Settling Time of 1.1 µs for 2 V Step (to 0.01%) PSRR 91 dB CMRR 84 dB
2 Applications
Portable High Speed Instrumentation Signal Conditioning Amplifier/ADC Buffers Barcode Scanners
3 Description
Using patented circuit topologies, the LM6152/LM6154 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 1.4 mA/amplifier supply current, the 75 MHz gain bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The slew rate of the devices increases with increasing input differential voltage, thus allowing the device to handle capacitive loads while maintaining large signal amplitude.
The LM6152/LM6154 can be driven by voltages that exceed both power supply rails, thus eliminating concerns about exceeding the common-mode voltage range. The rail-to-rail output ...
Similar Datasheet