Document
HLMP-Ex1A/1B-xxxDV (15° minimum), HLMP-Ex3A/3B-xxxDV (30° minimum) 5mm Extra High Brightness AlInGaP LED lamps
Data Sheet
Description
These 5mm Extra High Brightness AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long periods of time. These Extra High Brightness lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology.
These LED lamps are untinted. T-1¾ packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles.
These lamps are made with an advanced optical grade epoxy offering superior high temperature and high moisture resistance performance in outdoor signal and sign application. The maximum LED junction temperature limit of +130°C enables high temperature operation in bright sunlight conditions. The epoxy contain both uv-a and uv-b inhibitor to reduce the effects of long term exposure to direct sunlight.
Benefits
• Superior performance for outdoor environment
• Suitable for auto-insertion onto PC board
Features
• Viewing Angle: 15° minimum 30° minimum
• High luminous Intensity • Color
– 590nm Amber – 626nm Red • Package options: – With or without standoff • Superior resistance to moisture • Untinted for 15° and 30° lamps
Applications
• Traffic management: – Traffic signals – Pedestrian signals – Work zone warning lights – Variable message signs
• Solar Power signs • Commercial outdoor advertising
– Signs – Marquees
Package Dimension A: Non-standoff
8.71 ±0.20 (0.343 ±0.008)
5.00 ± 0.20 (0.197 ± 0.008)
1.14 ±0.20 (0.045 ± 0.008)
31.60 (1.244)
MIN.
CATHODE LEAD
0.70 (0.028) MAX.
2.35 (0.093) MAX.
B: Standoff
d
31.60 (1.244)
MIN.
CATHODE LEAD
5.00 ± 0.20 (0.197 ± 0.008)
8.71 ±0.20 (0.343 ±0.008)
1.14 ±0.20 (0.045 ±0.008)
1.50 ±0.15 (0.059 ±0.006)
0.70 (0.028) MAX.
1.00 MIN. (0.039)
0.50 ±0.10 (0.020 ±0.004)
SQ. TYP.
CATHODE FLAT
5.80 ±0.20 (0.228 ±0.008)
2.54 ±0.38 (0.100 ±0.015)
Viewing Angle
d
HLMP-Ex1B
12.39±0.25 (0.476±0.010)
HLMP-Ex3B
11.96±0.25 (0.459±0.010)
Notes: 1. All dimensions are in millimeters (inches) 2. Leads are mild steel with tin plating. 3. The epoxy meniscus is 1.21mm max 4. For Identification of polarity after the leads are
trimmed off, please refer to the illustration below:
1.00 MIN. (0.039)
CATHODE FLAT
0.50 ±0.10 (0.020 ±0.004)
SQ. TYP.
5.80 ±0.20 (0.228 ±0.008)
2.54 ±0.38 (0.100 ±0.015)
CATHODE 2
ANODE
Device Selection Guide
Minimum viewing Angle 2θ1/2 (Deg) [4]
15°
Color and Dominant Wavelength (nm), Typ [3]
Amber 590
Lamps without Standoff on leads (Package drawing A)
HLMP-EL1A-Z1KDV
Lamps with Standoff on leads (Package drawing B)
HLMP-EL1B-Z1KDV
Luminous Intensity Iv (mcd) [1,2,5] at 20 mA
Min
Max
12000
21000
HLMP-EL1A-Z1LDV
HLMP-EL1B-Z1LDV
12000
21000
Red 626
HLMP-EG1A-Z10DV HLMP-EG1B-Z10DV 12000
21000
30°
Amber 590
HLMP-EL3A-WXKDV HLMP-EL3B-WXKDV 5500
9300
HLMP-EL3A-WXLDV HLMP-EL3B-WXLDV 5500
9300
Red 626
HLMP-EG3A-WX0DV HLMP-EG3B-WX0DV 5500
9300
Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. Dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. 4. θ½ is the off-axis angle where the luminous intensity is half the on-axis intensity. 5. Tolerance for each bin limit is ±15%
Part Numbering System
HLMP-E x xx – x x x xx
Packaging Option
DV: Ammo Pack with minimum viewing angle of 15° or 30°
Color Bin Selection
0: Full Distribution K: Color Bin 2 & 4 L: Color Bin 4 & 6
Maximum Intensity Bin
Refer to Selection Guide
Minimum Intensity Bin
Refer to Devise Selection Guide
Viewing Angle and Lead Standoffs
1A: 15° without lead standoff 1B: 15° with lead standoff 3A: 30° without lead standoff 3B: 30° with lead standoff
Color
G: Red 626 L: Amber 590
Note: Please refer to AB 5337 for complete information on part numbering system.
3
Absolute Maximum Ratings
TJ = 25°C
Parameter
Red/ Amber
Unit
DC Forward Current [2]
50
mA
Peak Forward Current
100 [1]
mA
Average Forward Current
30
mA
Power Dissipation
120
mW
Reverse Voltage
5
V
Operating Temperature Range
-40 to +100
°C
Storage Temperature Range
-40 to +100
°C
Notes: 1. Duty Factor 30%, frequency 1KHz. 2. Derate linearly as shown in Figure 4
Electrical / Optical Characteristics
TJ = 25°C
Parameter
Symbol Min
Typ.
Max
Units
Test Conditions
Forward Voltage
Red / Amber
VF
Reverse Voltage
VR
Dominant Wavelength[1]
λd
Amber
Red
1.8
2.1
2.4
V
5
V
nm
587.0
590.0
594.5
618.0
626.0
630.0
IF = 20 mA IR = 100 μA IF = 20 mA
Peak Wavelength
λPEAK
Amber
594
Red
634
nm
Peak of Wavelength of Spectral
Distribution at IF = 20 mA
Spectra.