2.5V / 3.3V 32:16 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH
IDTQS3VH16233 2.5V / 3.3V 32:16 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH
INDUSTRIAL TEMPERATURE RANGE
QUICKSWITCH® PRODUCTS...
Description
IDTQS3VH16233 2.5V / 3.3V 32:16 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH
INDUSTRIAL TEMPERATURE RANGE
QUICKSWITCH® PRODUCTS 2.5V / 3.3V 32:16 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH
IDTQS3VH16233
FEATURES:
N channel FET switches with no parasitic diode to Vcc − Isolation under power-off conditions − No DC path to Vcc or GND − 5V tolerant in OFF and ON state
5V tolerant I/Os Low RON - 4Ω typical Flat RON characteristics over operating range Rail-to-rail switching 0 - 5V Bidirectional dataflow with near-zero delay: no added ground
bounce Excellent RON matching between channels Vcc operation: 2.3V to 3.6V High bandwidth - up to 500 MHz LVTTL-compatible control Inputs Undershoot Clamp Diodes on all switch and control Inputs Low I/O capacitance, 4pF typical Available in TSSOP package
APPLICATIONS:
Hot-swapping 10/100 Base-T, Ethernet LAN switch Low distortion analog switch Replaces mechanical relay ATM 25/155 switching
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
The QS3VH16233 HotSwitch is a 32-bit to 16-bit high bandwidth bus switch, which can multiplex or demultiplex data. The QS3VH16233 has very low ON resistance, resulting in under 250ps propagation delay through the switch. This device can be used as two 16-bit to 8-bit multiplexers or as one 32-bit to 16-bit multiplexer. SELx inputs control the data flow. TESTx inputs control either one or two ports connection. In the OFF and ON states, the switches are 5V-tolerant. In the OFF state, the switches of...
Similar Datasheet