Ethernet Transceiver. 88E1510 Datasheet

88E1510 Transceiver. Datasheet pdf. Equivalent

88E1510 Datasheet
Recommendation 88E1510 Datasheet
Part 88E1510
Description 10/100/1000 Mbps Energy Efficient Ethernet Transceiver
Feature 88E1510; Marvell® Alaska® 88E1510/88E1518/88E1512/88E1514 Integrated 10/100/1000 Mbps Energy Efficient Ethern.
Manufacture Marvell
Datasheet
Download 88E1510 Datasheet





Marvell 88E1510
Marvell® Alaska®
88E1510/88E1518/88E1512/88E1514
Integrated 10/100/1000 Mbps Energy Efficient Ethernet Transceiver
Datasheet - Public
Doc. No. MV-S107146-U0 Rev. D
April 2, 2021
Document Classification: Public
Cover



Marvell 88E1510
Alaska 88E1510/88E1518/88E1512/88E1514
Datasheet - Public
THIS DOCUMENT AND THE INFORMATION FURNISHED IN THIS DOCUMENT ARE PROVIDED "AS IS" WITHOUT ANY WARRANTY. MARVELL
AND ITS AFFILIATES EXPRESSLY DISCLAIM AND MAKE NO WARRANTIES OR GUARANTEES, WHETHER EXPRESS, ORAL, IMPLIED,
STATUTORY, ARISING BY OPERATION OF LAW, OR AS A RESULT OF USAGE OF TRADE, COURSE OF DEALING, OR COURSE OF
PERFORMANCE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.
This document, including any software or firmware referenced in this document, is owned by Marvell or Marvell's licensors, and is protected by
intellectual property laws. No license, express or implied, to any Marvell intellectual property rights is granted by this document. The information
furnished in this document is provided for reference purposes only for use with Marvell products. It is the user's own responsibility to design or build
products with this information. Marvell products are not authorized for use as critical components in medical devices, military systems, life or critical
support devices, or related systems. Marvell is not liable, in whole or in part, and the user will indemnify and hold Marvell harmless for any claim,
damage, or other liability related to any such use of Marvell products.
Marvell assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights of third parties that
may result from its use. You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning
the Marvell products disclosed herein. Marvell and the Marvell logo are registered trademarks of Marvell or its affiliates. Please visit www.marvell.com
for a complete list of Marvell trademarks and guidelines for use of such trademarks. Other names and brands may be claimed as the property of
others.
Copyright © 2021. Marvell and/or its affiliates. All rights reserved.
Document Classification: Public
April 2, 2021
Page 2
Doc. No. MV-S107146-U0 Rev. D
Copyright © 2021 Marvell



Marvell 88E1510
Alaska 88E1510/88E1518/88E1512/88E1514
Integrated 10/100/1000 Mbps Energy Efficient Ethernet
Transceiver
Datasheet - Public
PRODUCT OVERVIEW
The Alaska® 88E1510/88E1518/88E1512/88E1514
device is a physical layer device containing a single
10/100/1000 Gigabit Ethernet transceiver. The
transceiver implements the Ethernet physical layer
portion of the 1000BASE-T, 100BASE-TX, and
10BASE-T standards. It is manufactured using standard
digital CMOS process and contains all the active circuitry
required to implement the physical layer functions to
transmit and receive data on standard CAT 5 unshielded
twisted pair.
The device supports the RGMII (Reduced pin count
GMII) and SGMII for direct connection to a MAC/Switch
port. The SGMII can also be used on media/line side to
connect to SFP modules that support 1000BASE-X,
100BASE-FX and SGMII. It also supports Copper/Fiber
Auto-media applications with RGMII as the MAC
interface. SGMII operates at 1.25 Gbps over a single
differential pair thus reducing power and number of I/Os
used on the MAC interface.
The device integrates MDI termination resistors into the
PHY. This resistor integration simplifies board layout and
reduces board cost by reducing the number of external
components. The new Marvell® calibrated resistor
scheme will achieve and exceed the accuracy
requirements of the IEEE 802.3 return loss
specifications.
The device has an integrated switching voltage regulator
to generate all required voltages. The device can run off
a single 3.3V supply. The device supports 1.8V, 2.5V,
and 3.3V LVCMOS I/O Standards.
The 88E1510/88E1518/88E1512/88E1514 device
supports Synchronous Ethernet (SyncE) and Precise
Timing Protocol (PTP) Time Stamping, which is based on
IEEE1588 version 2 and IEEE802.1AS.
The 88E1510/88E1518/88E1512/88E1514 device
supports IEEE 802.3az-2010 Energy Efficient Ethernet
(EEE) and is IEEE 802.3az-2010 compliant.
The device incorporates the Marvell Advanced Virtual
Cable Tester® (VCT) feature, which uses Time Domain
Reflectometry (TDR) technology for the remote
identification of potential cable malfunctions, thus
reducing equipment returns and service calls. Using
VCT, the Alaska device detects and reports potential
cabling issues such as pair swaps, pair polarity and
excessive pair skew. The device will also detect cable
opens, shorts or any impedance mismatch in the cable
and reporting accurately within one meter the distance to
the fault.
The device uses advanced mixed-signal processing to
perform equalization, echo and crosstalk cancellation,
data recovery, and error correction at a Gigabits per
second data rate. The device achieves robust
performance in noisy environments with very low power
dissipation.
Features
10/100/1000BASE-T IEEE 802.3 compliant
Multiple Operating Modes
RGMII to Copper
SGMII to Copper (88E1512/88E1514 device
only)
RGMII to Fiber/SGMII (88E1512 device only)
RGMII to Copper/Fiber/SGMII with Auto-Media
Detect (88E1512 device only)
Copper to Fiber (1000BASE-X)
(88E1512/88E1514)
Four RGMII timing modes including integrated
delays - This eliminates the need for adding trace
delays on the PCB
Supports 1000BASE-X and 100BASE-FX on the
Fiber interface along with SGMII (88E1512 device
only)
Supports LVCMOS I/O Standards on the RGMII
Supports Energy Efficient Ethernet (EEE) - IEEE
802.3az-2010 compliant
EEE Buffering
Incorporates EEE buffering for seamless support
of legacy MACs
Ultra Low Power
Integrated MDI termination resistors that eliminate
passive components
Integrated Switching Voltage Regulators
Supports Green Ethernet
Active Power Save Mode
Energy Detect and Energy Detect+ low power
modes
IEEE1588 version 2 Time Stamping
Copyright © 2021 Marvell
April 2, 2021
Document Classification: Public
Doc. No. MV-S107146-U0 Rev. D
Page 3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)