Document
isc Thyristors
X0405NF
APPLICATIONS ·Highly sensitive triggering levels ·For capacitive discharge ignitions, motor control
in kitchen aids, overvoltage crowbar protection in low power supplies applications. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation
、
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL
PARAMETER
VDRM Repetitive peak off-state voltage
VRRM Repetitive peak reverse voltage
IT(AV) On-state current 180°conduction angle
ITSM Non-repetitive surge peak on-state current t= 20ms
PG(AV) Average gate power dissipation Tj = 125℃
Tj
Junction temperature
Tstg Storage temperature
ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
IRRM
Repetitive peak reverse current
VRM=VRRM,
VRM=VRRM, ,Tj=125℃
IDRM
Repetitive peak off-state current
VDM=VDRM,
VDM=VDRM ,Tj=125℃
VTM On-state voltage
ITM= 8A, tp = 380 µs
IGT
Gate-trigger current
VD=12V, RL=140Ω, RGK=1KΩ
VGT Gate-trigger voltage
VD=12V, RL=140Ω, RGK=1KΩ
IH
Holding current
VD=24V, RGK=1KΩ, ITM=4A
MIN
800 800 2.5 33 0.2 125 -40 to + 150
UNIT
V V A A W
℃
MIN MAX UNIT
5 200
μA
5 200
μA
1.8 V
20 50 μA
0.8 V
6 mA
isc website:www.iscsemi.com
1
isc & iscsemi is registered trademark
isc Thyristors
X0405NF
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website:www.iscsemi.com
2
isc & iscsemi is registered trademark
.