LED Driver. LC5910S Datasheet

LC5910S Driver. Datasheet pdf. Equivalent

LC5910S Datasheet
Recommendation LC5910S Datasheet
Part LC5910S
Description LED Driver
Feature LC5910S; Critical Current Mode Buck LED Driver IC LC5910S Data Sheet Description LC5910S is the buck single.
Manufacture SANKEN
Datasheet
Download LC5910S Datasheet





SANKEN LC5910S
Critical Current Mode Buck LED Driver IC
LC5910S
Data Sheet
Description
LC5910S is the buck single-output LED driver IC that
achieves the LED drive with few components, high
efficiency, and high accuracy. The IC has various
protections and configures various LED circuits. The
PWM dimming and the three-level dimming (the
reference voltage selection function for LED current
limiting) are available.
Features
Converter Parts
Critical Current Mode (CRM) Control
(Low switching loss, low noise, reduction in the
number of components)
Enable Function
Bottom Detection Voltage 100 mV (typ.)
LED Control Parts
PWM Dimming Function
Reference Voltage Selection Function for LED
Current Limiting (three levels, 75% to 100%)
Current Reference Accuracy: ±1%
Protections
LED Output Short Circuit Protection: Pulse-by-pulse
Current Detection Short Circuit Protection: Auto-
restart
Input Voltage Drop Protection: Auto-restart
Overvoltage Protection (OVP): Auto-restart, fault
output
Thermal Shutdown (TSD) with Hysteresis: Auto-
restart
Package
SOP8
Not to scale
Specification
Recommended Supply Voltage: 12 V (min.) to 17 V
(max.)
Circuit Current at Standby: 100 μA (typ.)
Application
LED Back Light
LED Lighting Equipment
LED Bulbs
Typical Application
VIN
Fault Signal
PWM Signal
LED Current
Switch Signal
CIN
RBD1 CBD
RBD2
Q1
LED
DS
COUT
L1
VCC
CVCC
RCS
LC5910S -DSE Rev.2.2
SANKEN ELECTRIC CO., LTD
1
Mar.01, 2017
http://www.sanken-ele.co.jp
© SANKEN ELECTRIC CO., LTD. 2016



SANKEN LC5910S
LC5910S
Contents
Description ------------------------------------------------------------------------------------------------------ 1
Contents --------------------------------------------------------------------------------------------------------- 2
1. Absolute Maximum Ratings----------------------------------------------------------------------------- 3
2. Recommended Operating Range----------------------------------------------------------------------- 3
3. Electrical Characteristics -------------------------------------------------------------------------------- 4
4. Block Diagram --------------------------------------------------------------------------------------------- 5
5. Pin Configuration Definitions--------------------------------------------------------------------------- 5
6. Typical Applications -------------------------------------------------------------------------------------- 6
7. Physical Dimension --------------------------------------------------------------------------------------- 7
8. Marking Diagram ----------------------------------------------------------------------------------------- 8
9. Operational Description --------------------------------------------------------------------------------- 9
9.1 Operation in Critical Current Mode (CRM)--------------------------------------------------- 9
9.2 Enable ------------------------------------------------------------------------------------------------- 9
9.3 Reference Voltage Select Function for LED Current Limit -------------------------------- 9
9.4 LED Current Setting ----------------------------------------------------------------------------- 10
9.5 Bottom Detection Function (Off-time Period Termination Detection)------------------ 10
9.6 Maximum On-time -------------------------------------------------------------------------------- 10
9.7 PWM Dimming ------------------------------------------------------------------------------------ 11
9.8 External Power MOSFET Gate Drive -------------------------------------------------------- 11
9.9 Overvoltage Protection (OVP) ------------------------------------------------------------------ 12
9.10 Fault Signal ----------------------------------------------------------------------------------------- 12
9.11 Thermal Shutdown (TSD) ----------------------------------------------------------------------- 12
10. Circuit Constant Setting ------------------------------------------------------------------------------- 13
10.1 Inductor Setting ----------------------------------------------------------------------------------- 13
10.2 Input Smoothing Electrolytic Capacitor, CIN, Setting-------------------------------------- 15
10.3 Output Smoothing Capacitor, COUT, Setting ------------------------------------------------- 15
10.4 Current Detection Resistor, RCS, Setting ----------------------------------------------------- 16
11. Design Notes ---------------------------------------------------------------------------------------------- 17
11.1 External Components ---------------------------------------------------------------------------- 17
11.1.1 Inductor --------------------------------------------------------------------------------------- 17
11.1.2 Input and Output Smoothing Electrolytic Capacitor -------------------------------- 17
11.1.3 Current Detection Resistor ---------------------------------------------------------------- 17
11.1.4 Freewheeling Diode ------------------------------------------------------------------------- 17
11.1.5 External Power MOSFET ----------------------------------------------------------------- 17
11.2 PCB Trace Layout -------------------------------------------------------------------------------- 18
12. PCB Pattern Layout ------------------------------------------------------------------------------------ 19
13. Reference Design of Power Supply ------------------------------------------------------------------ 20
14. Design Flow Chart -------------------------------------------------------------------------------------- 21
Important Notes---------------------------------------------------------------------------------------------- 22
LC5910S -DSE Rev.2.2
SANKEN ELECTRIC CO., LTD
2
Mar.01, 2017
http://www.sanken-ele.co.jp
© SANKEN ELECTRIC CO., LTD. 2016



SANKEN LC5910S
LC5910S
1. Absolute Maximum Ratings
Current polarities are defined as follows: current going into the IC (sinking) is positive current (+); and current
coming out of the IC (sourcing) is negative current (−).
Unless specifically noted, TA = 25 °C.
Parameter
Symbol
Pins
Rating
Unit
CS Pin Voltage
VCC Pin Voltage
VCS
13
0.3 to 18.0
V
VCC
23
0.3 to 18.0
V
OUT Pin Voltage
VOUT
43
0.3 to 18.0
V
BD Pin Voltage
FAULT Pin Voltage
PWM Pin Voltage
SEL Pin Voltage
VBD
53
1.0 to 18.0
V
VFAULT
63
0.3 to 18.0
V
VPWM
73
0.3 to 18.0
V
VSEL
8−3
0.3 to 18.0
V
OUT Pin Sink/Source Current
IOUT
43
1.5 to 1.5
A
BD Pin Sink/Source Current
IBD
53
Allowable Dissipation(1)(2)
PD
Thermal Resistance between Junction
and Lead (pin 3)
θj- Pin
Thermal Resistance between Junction
and Ambient (2)
θj-A
Junction Temperature(3)
Tj
Operating Ambient Temperature(1)
Top
4.0 to 4.0
1.2
65
95
150
40 to 125
mA
W
°C/W
°C/W
°C
°C
Storage Temperature
Tstg
40 to 150
°C
(1) Limited by junction temperature.
(2) The IC is mounted on the glass-epoxy board (40 × 40 mm) with copper area (25 × 25 mm).
(3) The temperature of thermal shutdown operation is 150 °C (typ.).
2. Recommended Operating Range
The recommended operating range shows the operating conditions that are required for maintaining the normal
circuit function shown in the electrical characteristics. The IC should be used within the recommended operating range.
Unless specifically noted, TA = 25 °C.
Parameter
Symbol
Min.
Typ.
Max.
Unit
Input Voltage Range
Operating Ambient Temperature
Range
VCC
12
17
V
TOP
40
85
°C
LC5910S -DSE Rev.2.2
SANKEN ELECTRIC CO., LTD
3
Mar.01, 2017
http://www.sanken-ele.co.jp
© SANKEN ELECTRIC CO., LTD. 2016





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)