Simulator interface
Simulator interface – For RT Box hardware
Analog outputs RJ45 connectors
Digital inputs Optical bers
1
20
35
Analo...
Description
Simulator interface – For RT Box hardware
Analog outputs RJ45 connectors
Digital inputs Optical bers
1
20
35
Analog outputs test points
To OPAL digital inputs DB-37 connector
Digital inputs test points
To OPAL analog outputs
DB-37 connector
1
10 kΩ
44.45 mm (1U)
Main power supply onnector (SD-50BV)
Alternative power supply connector
4 25
1
3
6
Pin1 GND Pin2 GND Pin3 +5V Pin4 -15V Pin5 +15V Pin6 GND
1 Pin1 +5V
2 Pin2 -15V
3 Pin3 +15V 4 Pin4 GND
GENERAL DESCRIPTION
428.6 mm
This interface interconnects the BoomBox controller to an RT Box HIL simulator.
from imperTixhis wayt,oaOnPyALcontrol implementation can be first tested
power module
analog in
– without any risk – on a simulated converter ; before it
is later tested on real hardware. In this second step, all
cables can be instantly swapped from the interface to
the real converter.
+15V
1,2 4 5
7,8
-15V
BoomBox
AAinn[a0l.o.1g5x]16 1 20 Digital x16
TP 100 Ω
interface
jumper
Anaxlo1g6x1 16 Di3g5ital x1
20 1 Dout[0..15]
RT Box hardware
5V 5V 5V
5
5V
5V
TP
Din[0..15]
9 28
ANALOG OUTPUTS
14
–– 16 channels, RJ45 connecxt1o6rs
–– To be wired to analog inputs of the Boo5mV Box
–– -10 to 10 V voltage range
37 19
20
1
Aout[0..15]
TP
4 5
35
16
37
x16
1
20
DIGITAL INPUTS
–– 16 independent channels
35
–– Optical fiber wiring to digital outputs of the BoomBox
–– Max. prop. delay difference between 2 channels: 80 n s
–– 5V supplied directly by the RT Box HIL Simulator
1
35 16 18...
Similar Datasheet