LED. XP-L Datasheet

XP-L LED. Datasheet pdf. Equivalent

XP-L Datasheet
Recommendation XP-L Datasheet
Part XP-L
Description LED
Feature XP-L; PRODUCT FAMILY DATA SHEET XLamp® XP-L LEDs XP-L High Density LED XP-L High Intensity LED PRODUCT .
Manufacture Cree
Datasheet
Download XP-L Datasheet




Cree XP-L
PRODUCT FAMILY DATA SHEET
XLamp® XP-L LEDs
XP-L High Density LED
XP-L High Intensity LED
PRODUCT DESCRIPTION
FEATURES
TABLE OF CONTENTS
XLamp® XP-L LEDs are available in two •
versions: High Density (HD) and High
Intensity (HI).
The XLamp XP-L HD LED is the highest •
performing discrete in Cree LED’s HD class •
of LEDs, delivering the next generation of •
lumen output and efficacy in the compact
3.45 mm x 3.45 mm XP footprint. Cree LED’s
HD LEDs, optimized to deliver maximum •
lumen output in a small form factor, enable •
lighting manufacturers to improve the •
performance of any lighting design, create •
smaller and less expensive systems, and
develop new lighting solutions that were
previously not possible.
The XLamp XP-L HI LED is the first of Cree
LED’s new class of high‑intensity LEDs
optimized to deliver maximum candela
through secondary optics. Built on Cree
LED’s breakthrough SC5 Technology®
Platform, the XP-L HI LED delivers 120
percent more candela than the XP-L HD
LED through the same optic. The XP-L HI
LED leverages the industry’s highest single-
die performance and a new innovative
primary optic design that radically reduces
the optical source size to deliver both
lumens and intensity.
Available in white, 70-CRI white, 80‑CRI
white, 85‑CRI white and 90‑CRI white
ANSI‑compatible chromaticity bins
Binned at 85 °C
Maximum drive current: 3000 mA
Low thermal resistance: 2.2 °C/W
Wide viewing angle: 125° (XP-L HD),
115° (XP-L HI)
Unlimited floor life at ≤ 30 ºC/85% RH
Reflow solderable - JEDEC J‑STD‑020C
Electrically neutral thermal path
RoHS and REACh compliant
UL® recognized component (E349212)
Characteristics................................................ 2
Flux Characteristics - XP-L High Density....... 3
Flux Characteristics - XP-L High Intensity..... 8
Relative Spectral Power Distribution........... 12
Relative Flux vs. Junction Temperature....... 12
Electrical Characteristics.............................. 13
Relative Flux vs. Current............................... 13
Relative Chromaticity vs. Current................. 14
Relative Chromaticity vs. Temperature........ 15
Typical Spatial Distribution........................... 16
Thermal Design............................................. 16
Performance Groups – Luminous Flux....... 17
Performance Groups – Chromaticity........... 18
Standard Cool White Kits Plotted on ANSI
Standard Chromaticity Regions................... 21
Standard Warm and Neutral White Kits
Plotted on ANSI Standard Chromaticity
Regions.......................................................... 22
Standard Chromaticity Kits.......................... 24
Bin and Order Code Formats........................ 25
Reflow Soldering Characteristics................. 26
Notes............................................................. 27
Mechanical Dimensions............................... 29
Tape and Reel................................................ 31
Packaging...................................................... 33
Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com
© 2014-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and
the Cree LED logo is a trademark, of Cree, Inc. XLamp® and SC5 Technology® are registered trademarks of Cree LED. UL® and the UL logo are registered
trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product
and/or vendor endorsement, sponsorship or association.
CLD-DS97
REV 6
1



Cree XP-L
XLAMP® XP-L LED
CHARACTERISTICS
Characteristics
Thermal resistance, junction to solder point
Viewing angle (FWHM) - XP-L High Density
Viewing angle (FWHM) - XP-L High Intensity
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
DC forward current
Reverse voltage
Forward voltage (@ 1050 mA, 85 °C)
LED junction temperature
Unit
°C/W
degrees
degrees
mV/°C
V
mA
V
V
°C
Minimum
Typical
2.2
125
115
-1.4
2.84
Maximum
8000
3000
-5
3.25
150
© 2014-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and
the Cree LED logo is a trademark, of Cree, Inc. XLamp® and SC5 Technology® are registered trademarks of Cree LED. UL® and the UL logo are registered
trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product
and/or vendor endorsement, sponsorship or association.
CLD-DS97
REV 6
2



Cree XP-L
XLAMP® XP-L LED
FLUX CHARACTERISTICS - XP-L HIGH DENSITY (TJ = 85 °C)
The following table provides order codes for XLamp XP-L High Density LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 25). For definitions of the chromaticity kits, please see the Standard
Chromaticity Kits section (page 24).
Chromaticity
Minimum Luminous Flux (lm)
@ 1050 mA
Kit
CCT
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
V6
480
535
V5
460
513
51 6200 K V4
440
491
V3
420
468
V2
400
446
V6
480
535
V5
460
513
53 6000 K V4
440
491
V3
420
468
V2
400
446
V6
480
535
V5
460
513
50 6200 K V4
440
491
V3
420
468
V2
400
446
V6
480
535
V5
460
513
E1 6500 K V4
440
491
V3
420
468
V2
400
446
V6
480
535
V5
460
513
E2 5700 K V4
440
491
V3
420
468
V2
400
446
Order Codes
65 CRI Typical
XPLAWT-00-0000-0000V6051
XPLAWT-00-0000-0000V5051
XPLAWT-00-0000-0000V4051
XPLAWT-00-0000-0000V3051
XPLAWT-00-0000-0000V6053
XPLAWT-00-0000-0000V5053
XPLAWT-00-0000-0000V4053
XPLAWT-00-0000-0000V3053
XPLAWT-00-0000-0000V6050
XPLAWT-00-0000-0000V5050
XPLAWT-00-0000-0000V4050
XPLAWT-00-0000-0000V3050
XPLAWT-00-0000-0000V60E1
XPLAWT-00-0000-0000V50E1
XPLAWT-00-0000-0000V40E1
XPLAWT-00-0000-0000V30E1
XPLAWT-00-0000-0000V60E2
XPLAWT-00-0000-0000V50E2
XPLAWT-00-0000-0000V40E2
70 CRI Minimum
XPLAWT-00-0000-000BV6051
XPLAWT-00-0000-000BV5051
XPLAWT-00-0000-000BV4051
XPLAWT-00-0000-000BV3051
XPLAWT-00-0000-000BV2051
XPLAWT-00-0000-000BV6053
XPLAWT-00-0000-000BV5053
XPLAWT-00-0000-000BV4053
XPLAWT-00-0000-000BV3053
XPLAWT-00-0000-000BV2053
XPLAWT-00-0000-000BV6050
XPLAWT-00-0000-000BV5050
XPLAWT-00-0000-000BV4050
XPLAWT-00-0000-000BV3050
XPLAWT-00-0000-000BV2050
XPLAWT-00-0000-000BV60E1
XPLAWT-00-0000-000BV50E1
XPLAWT-00-0000-000BV40E1
XPLAWT-00-0000-000BV30E1
XPLAWT-00-0000-000BV20E1
XPLAWT-00-0000-000BV60E2
XPLAWT-00-0000-000BV50E2
XPLAWT-00-0000-000BV40E2
XPLAWT-00-0000-000BV30E2
XPLAWT-00-0000-000BV20E2
Notes
Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on
CRI measurements. See the Measurements section (page 27).
XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified
by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
© 2014-2021 Cree LED. The information in this document is subject to change without notice. Cree® and the Cree logo are registered trademarks, and
the Cree LED logo is a trademark, of Cree, Inc. XLamp® and SC5 Technology® are registered trademarks of Cree LED. UL® and the UL logo are registered
trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product
and/or vendor endorsement, sponsorship or association.
CLD-DS97
REV 6
3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)