|
|
Through-Hole Capacitor. T110 Datasheet |
|
|
|
Tantalum Through-Hole Capacitors – Hermetically Sealed
T110 Axial MIL–PRF–39003 Polar Type and
T212 (CSR13 Style)
Overview
The KEMET standard hermetically sealed T110 Series is
targeted for use in high humidity environments. These
capacitors are ruggedly built, designed for miniaturized
circuitry, and are especially well-suited for coupling, bypass,
filtering and RC timing circuits. The T110 Series exhibits
excellent stability as well as extremely low DC leakage
current, dissipation factor, and ESR/impedance over a wide
temperature and frequency range. Available in standard
EIA capacitance values from 0.0047 µF to 330 µF in ±20%,
±10%, and ±5% tolerances, the T110 Series is now offered in
working voltages of 6 VDC to 125 VDC and low ESR limits.
Higher CV values in comparable case sizes are available in
the KEMET T410 Series.
Benefits
• Taped and reeled per EIA Specification RS–296
• Marking per MIL–STD–1285
• Qualified to MIL–PRF–39003 (CSR13 Style)
• Failure rate options: Graded – B, C, D, and G
Exponential – M, P, R, and S*
• Capacitance values of 0.0047 μF to 330 μF
• Tolerances of ±5%, ±10% and ±20%
• Voltage rating of 6 – 125 VDC
• Operating temperature range of −55°C to +125°C
• Case sizes: A, B, C, D
*Failure rates apply to military products only
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include coupling, bypass, filtering and RC timing circuits in miniaturized circuitry.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
T2031_T110_AXIAL_T212 • 2/24/2020
1
|
Tantalum Through-Hole Capacitors – Hermetically Sealed
T110 Axial MIL–PRF–39003 Polar Type and T212 (CSR13 Style)
Ordering Information – T110
T
Capacitor
Class
T=
Tantalum
110 A
105
K
050
A
T
Series
Case Capacitance Code Capacitance Rated Voltage Failure Rate/Military Termination
Size
(pF)
Tolerance
(VDC)
Product Only
Finish
Hermetically
sealed axial
capacitor
A First two digits J = ±5%
B
represent
K = ±10%
C significant figures. M = ±20%
D Third digit specifies
number of zeros.
006 = 6
010 = 10
015 = 15
020 = 20
035 = 35
050 = 50
060 = 60
075 = 75
100 = 100
125 = 125
A = N/A
T = 100% Tin
S = Standard
(Sn/Pb)
7200
Specification
Blank = Sleeved/ Bulk
0100 = Without sleeve
7200 = Tape & Reel
7293 & 7443 = Ammo
All capacitors are sleeved
unless specified.
Ordering Information – T212 (CSR13 Style)
MIL product
T
Capacitor
Class
T=
Tantalum
212 A
105
K
050
B
S
7200
Series
Case Capacitance Code Capacitance Rated Voltage Failure Rate/Military Termination
Size
(pF)
Tolerance (VDC)
Product Only
Finish
Specification
Hermetically
sealed axial
military
grade
capacitor
A First two digits J = ±5%
B
represent
K = ±10%
C significant figures. M = ±20%
D Third digit specifies
number of zeros.
006 = 6
010 = 10
015 = 15
020 = 20
035 = 35
050 = 50
075 = 75
100 = 100
Graded:
B = 0.1%/k hours
C = 0.01%/k hours
D = 0.001%/k hours
G= 1.0 %/k hours
Exponential:
M = 1%/k hours
P = 0.1%/k hours
R = 0.01%/k hours
S = 0.001%/k hours
S=
Standard
(Sn/Pb)
All capacitors are sleeved
unless specified.
0100 = Without sleeve
7200 = Tape & Reel
7293 & 7443 = Ammo
4250 = "A" surge current
4251 = "B" surge current
4252 = "C" surge current
Ordering Information – MIL–PRF–39003
M39003
/01
6003
A
Capacitor Class
Slash
Dash Number Surge Option
Military
specification
number
Specification
sheet number
Failure rate
level
A = C-4250
B = C-4251
C = C-4252
Blank = No surge
Orders should be entered by the military specification number, including the dash number and surge option letter (A, B or C).
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2031_T110_AXIAL_T212 • 2/24/2020
2
|
Tantalum Through-Hole Capacitors – Hermetically Sealed
T110 Axial MIL–PRF–39003 Polar Type and T212 (CSR13 Style)
Performance Characteristics
Item
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz at 25°C)
Leakage Current
Failure Rate (MIL–39003, CSR13 capacitors only)
Performance Characteristics
−55°C to 125°C
0.0047 – 330 μF at 120 Hz/25°C
J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
6 – 125 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
(At rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C)
Approved failure rate: S (0.001%/k hours) − Exponential, D (0.001%/k hours)
and C (0.01%/k hours) − Graded
Dimensions – Inches (Millimeters)
1.50±0.250
(38.10±6.35)
SIDE VIEW
C
+
B
L
1.50±0.250
(38.10±6.35)
Case
Size
A
B
C
D
Uninsulated
D
±0.005
(±0.13)
0.125
(3.18)
0.175
(4.45)
0.279
(7.09)
0.341
(8.66)
L
±0.031
(±0.79)
0.250
(6.35)
0.438
(11.13)
0.650
(16.51)
0.750
(19.05)
Insulated
D
±0.010
(±0.25)
0.135
(3.43)
0.185
(4.70)
0.289
(7.34)
0.351
(8.92)
L
±0.031
(±0.79)
0.286
(7.26)
0.474
(12.04)
0.686
(17.42)
0.786
(19.96)
B
±0.002
C
(±0.05) Maximum
0.020
(0.51)
0.020
(0.51)
0.025
(0.64)
0.025
(0.64)
0.422
(10.72)
0.610
(15.49)
0.822
(20.88)
0.922
(23.42)
END VIEW
D
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2031_T110_AXIAL_T212 • 2/24/2020
3
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |