0.6-/1-A Synchronous Step-Down Converter
TPS62860, TPS62861
SLUSDU8F – SEPTEMBER 2019 – REVISED OCTOBER 2023
TPS6286x 1.75-V to 5.5-V Input, 0.6-/1-A Synchronous...
Description
TPS62860, TPS62861
SLUSDU8F – SEPTEMBER 2019 – REVISED OCTOBER 2023
TPS6286x 1.75-V to 5.5-V Input, 0.6-/1-A Synchronous Step-Down Converter with I2C/VSEL Interface
1 Features
2.3-μA operating quiescent current Up to 4-MHz switching frequency 1% output voltage accuracy DVS output from
– 0.4 V to 1.9875 V (12.5-mV steps) I2C user interface to adjust
– Output voltage presets – Ramp speed VSEL pin to toggle output voltage during operation Power-good indication Supports < 6-mm² design size Supports < 0.6-mm design height Tiny, 8-pin, 0.35-mm pitch WCSP package Optimized pinout to support 0201 components
2 Applications
Wearable electronics Portable electronics Mobile phones Medical sensor patches and patient monitors
VIN 1.75V – 5.5V
4.7 ¢F
TPS628610
VIN
SW
GND
VOS
0.47µH
EN
SDA
VSEL
SCL
VOUT 10 £F
VIN 1.75V – 5.5V
4.7 ¡F
TPS628601/2
VIN
SW
GND
VOS
1.0µH
EN
VSEL-1
PG
VSEL-2
VOUT 10 F
Typical Application
3 Description
The TPS6286x devices are high-frequency, synchronous step-down converters with I2C- and VSEL-Interface. The devices provide an efficient, flexible, and high-power density point-of-load DC/DC design. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for the smallest output voltage ripple. Together, with its DCS-Control arch...
Similar Datasheet