DatasheetsPDF.com

USB Bridge. FT232HP Datasheet

DatasheetsPDF.com

USB Bridge. FT232HP Datasheet






FT232HP Bridge. Datasheet pdf. Equivalent




FT232HP Bridge. Datasheet pdf. Equivalent





Part

FT232HP

Description

High Speed USB Bridge



Feature


FT233HP/FT232HP Datasheet Version 1.0 Do cument No.: FT_001484 Clearance No.: FT DI#558 Future Technology Devices Inter national Ltd FT233HP/FT232HP (High Sp eed USB Bridge with Type-C/PD3.0 Contro ller) The FT233HP/FT232HP is a Hi-Spee d USB device with Type-C/PD 3.0 contr oller IC that fully supports the lates t USB Type-C and Power Delivery (PD) st andards enabling s.
Manufacture

FTDI

Datasheet
Download FT232HP Datasheet


FTDI FT232HP

FT232HP; upport for power negotiation with the ability to sink or source current to a USB host device. The USB bridge funct ion delivers 1 independent channel com patible with the FT232H – Single Hi-s peed USB to multipurpose UART/FIFO sol ution. The FT233HP/FT232HP has the fo llowing advanced features: Suppor ts PD Specification 3.0. 2 USB PD 3.0 Port Support. Po.


FTDI FT232HP

rt 1 supports Dual Role Swap Function wh ile Port 2 supports sink mode with c harging function through to Port 1 (FT2 33HPQ and FT233HPL only). Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and mo re PDOs as sink or source. Type-C/P D Physical Layer Protocol. PD polic y engine using 32-bit RISC controller w ith 8kB data RAM and 48kB code ROM. PD mode configur.


FTDI FT232HP

ation through external EEPROM. Options to use external MCU controlling PD pol icy through I2C interface. Up to 8 Configurable PD GPIO pins support. E xternal MCU support through I2C bus. External EEPROM support for USB devic e configuration and PD profile. S ingle channel USB to serial / parallel ports with a variety of configurations . Entire USB p.

Part

FT232HP

Description

High Speed USB Bridge



Feature


FT233HP/FT232HP Datasheet Version 1.0 Do cument No.: FT_001484 Clearance No.: FT DI#558 Future Technology Devices Inter national Ltd FT233HP/FT232HP (High Sp eed USB Bridge with Type-C/PD3.0 Contro ller) The FT233HP/FT232HP is a Hi-Spee d USB device with Type-C/PD 3.0 contr oller IC that fully supports the lates t USB Type-C and Power Delivery (PD) st andards enabling s.
Manufacture

FTDI

Datasheet
Download FT232HP Datasheet




 FT232HP
FT233HP/FT232HP Datasheet
Version 1.0
Document No.: FT_001484 Clearance No.: FTDI#558
Future Technology
Devices International
Ltd
FT233HP/FT232HP
(High Speed USB Bridge with
Type-C/PD3.0 Controller)
The FT233HP/FT232HP is a Hi-Speed USB
device with Type-C/PD 3.0 controller IC that
fully supports the latest USB Type-C and Power
Delivery (PD) standards enabling support for
power negotiation with the ability to sink or
source current to a USB host device. The USB
bridge function delivers 1 independent channel
compatible with the FT232H Single Hi-speed
USB to multipurpose UART/FIFO solution. The
FT233HP/FT232HP has the following advanced
features:
Supports PD Specification 3.0.
2 USB PD 3.0 Port Support. Port 1 supports Dual
Role Swap Function while Port 2 supports sink
mode with charging function through to Port 1
(FT233HPQ and FT233HPL only).
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and
more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with
8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy
through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus.
External EEPROM support for USB device
configuration and PD profile.
Single channel USB to serial / parallel ports with
a variety of configurations.
Entire USB protocol handled on the chip. No USB
specific firmware programming required.
USB 2.0 Hi-Speed (480Mbits/Second) and Full
Speed (12Mbits/Second) compatible.
Multi-Protocol Synchronous Serial Engine
(MPSSE) to simplify synchronous serial protocol
(USB to JTAG, I2C (MASTER), SPI (MASTER) or
bit-bang) design.
UART transfer data rate up to 12Mbaud. (RS232
Data Rate limited by external level shifter).
USB to asynchronous 245 FIFO mode for transfer
data rate up to 8 Mbyte/Sec.
USB to synchronous 245 parallel FIFO mode for
transfers up to 40 Mbytes/Sec
Supports a proprietary half duplex FT1248 interface with
a configurable width, bi-directional data bus (1, 2, 4 or 8
bits wide).
CPU-style FIFO interface mode simplifies CPU interface
design.
Fast serial interface option.
FTDI’s royalty-free Virtual Com Port (VCP) and Direct
(D2XX) drivers eliminate the requirement for USB driver
development in most cases.
Adjustable receive buffer timeout.
Option for transmit and receive LED drive signals.
Bit-bang Mode interface option with RD# and WR#
strobes
Highly integrated design includes 5V to 3.3/+1.8V LDO
regulator for VCORE, integrated POR function
Asynchronous serial UART interface option with full
hardware handshaking and modem interface signals.
Fully assisted hardware or X-On / X-Off software
handshaking.
UART Interface supports 7/8 bit data, 1/2 stop bits, and
Odd/Even/Mark/Space/No Parity.
Auto-transmit enable control for RS485 serial applications
using the TXDEN pin.
Operational mode configuration and USB Description
strings configurable in external EEPROM over the USB
interface.
Configurable I/O drives strength (4, 8, 12 or 16mA) and
slew rate.
Low operating and USB suspend current.
UHCI/OHCI/EHCI host controller compatible.
USB Bulk data transfer mode (512 byte packets in Hi-
Speed mode).
+1.2V (chip core) and +3.3V I/O interfacing (+5V
Tolerant).
Extended -40°C to 85°C industrial operating temperature
range.
3 IC Package with RoHS compliant Support:
FT233HPQ:Compact 64-pin Lead Free QFN package
supports 2 PD 3.0 port
FT233HPL:Compact 64-pin Lead Free LQFP package
supports 2 PD 3.0 port
FT232HPQ:Compact 56-pin Lead Free QFN package
supports 1 PD 3.0 Port
Configurable ACBUS I/O pins.
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or r eproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentat ion are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology
Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your
statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in
which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminar y
information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Pa rk,
Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640
Copyright © Future Technology Devices International Limited
1




 FT232HP
1 Typical Applications
USB Type-C/USB 3.0 Power Delivery Support
High-power application via USB PD and/or
Type-C port
Get power from USB device functions, e.g.
portable USB host needs charging when USB is
connected.
Single chip USB to UART (RS232, RS422 or
RS485)
USB to FIFO
USB to FT1248
USB to JTAG
USB to SPI
USB to I2C
USB to Bit-Bang
USB to Fast Serial Interface
USB to CPU target interface (as memory)
FT233HP/FT232HP Datasheet
Version 1.0
Document No.: FT_001484 Clearance No.: FTDI#558
USB Instrumentation
USB Industrial Control
USB EPOS Control
USB MP3 Player Interface
USB FLASH Card Reader / Writers
Set Top Box - USB interface
USB Digital Camera Interface
USB Bar Code Readers
1.1 Driver Support
The FT233HP/FT232HP requires USB device drivers (listed below), available free from
http://www.ftdichip.com, to operate. The VCP version of the driver creates a Virtual COM Port allowing
legacy serial port applications to operate over USB e.g. serial emulator application TTY. Another FTDI
USB driver, the D2XX driver, can also be used with application software to directly access the
FT233HP/FT232HP through a DLL.
Royalty free VIRTUAL COM PORT
(VCP) DRIVERS for...
Windows 10 32,64-bit
Windows 8/8.1 32,64-bit
Windows 7 32,64-bit
Windows Server 2008 and server 2012 R2
Mac OS-X
Linux 2.4 and greater
Royalty free D2XX Direct Drivers
(USB Drivers + DLL S/W Interface)
Windows 10 32,64-bit
Windows 8/8.1 32,64-bit
Windows 7 32,64-bit
Windows Server 2008 and server 2012 R2
Linux 2.4 and greater
Android(J2xx)
Mac OS-X
Copyright © Future Technology Devices International Limited
2




 FT232HP
FT233HP/FT232HP Datasheet
Version 1.0
Document No.: FT_001484 Clearance No.: FTDI#558
1.2 Part Numbers
Part Number
FT232HPQ xxxx
FT233HPQ-xxxx
FT233HPL-xxxx
Package
56 Pin QFN
64 Pin QFN
64 Pin LQFP
Please refer to section 7 for all package mechanical parameters.
1.3 USB Compliant
The FT233HP is fully compliant with the USB 2.0 specification and the USB Type-C & PD 3.0 specification.
It has been given the USB-IF Test-ID (TID) 3425*.
* for PD port1
The timing of the rise/fall time of the USB signals is not only dependant on the USB signal drivers, it is
also dependant system and is affected by factors such as PCB layout, external components and any
transient protection present on the USB signals. For USB compliance these may require a slight
adjustment. Timing can also be changed by adding appropriate passive components to the USB signals.
Copyright © Future Technology Devices International Limited
3






Recommended third-party FT232HP Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)