Document
Datasheet Values Refer to PCN-OPT-1225-2022-REV-0
www.vishay.com
TSSP530..
Vishay Semiconductors
IR Sensor Module For Reflective Sensor, Light Barrier, And Fast Proximity Applications
DESCRIPTION
The TSSP530.. series are compact infrared detector modules for presence and fast proximity sensing applications. They provide an active low output in response to infrared bursts at 940 nm. The frequency of the burst should correspond to the carrier frequency shown in the parts table.
This component has not been qualified according to automotive specifications.
23051
LINKS TO ADDITIONAL RESOURCES
Product Page
3D 3D
3D Models
Calculators
Marking
Packages
Holders
Bends and Cuts
FEATURES • Presence sensor: up to 2 m distance, find
more info at: www.vishay.com/doc?49009 • Light barrier: up to 12 m distance,
TSAL6200 with IF = 50 mA, find more info at: www.vishay.com/doc?49650 • Fast proximity: up to 2 m range at 5 ms response time, find more info at: www.vishay.com/doc?82741 • Supply voltage: 2.0 V to 5.5 V • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS • Reflective sensors for hand dryers, towel or soap
dispensers, water faucets, toilet flush • Vending machine fall detection • Security and pet gates • Person or object vicinity switch • Fast proximity sensors for toys, robotics, drones, and
other consumer and industrial uses
DESIGN SUPPORT TOOLS • 3D models • Window size calculator
BLOCK DIAGRAM
16833_8
33 kΩ
Input
AMP
Band pass
Demodulator
PIN
3 VS
1 OUT
2 GND
Rev. 2.0, 02-Feb-2023
1
Document Number: 82780
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Datasheet Values Refer to PCN-OPT-1225-2022-REV-0
www.vishay.com
TSSP530..
Vishay Semiconductors
MECHANICAL DATA Pinning: 1 = OUT, 2 = GND, 3 = VS
ORDERING CODE TSSP530.. - 1800 pieces in bags
PRESENCE SENSING
+3 V IR emitter
1 2 3
23197
Envelope signal
38 kHz
+3 V
Out to µC
IR detector
PARTS TABLE
38 kHz Carrier frequency
56 kHz Package Pinning Dimensions (mm) Mounting Application
Special options
TSSP53038 TSSP53056
Minimold 1 = OUT, 2 = GND, 3 = VS
5.4 W x 6.35 H x 4.9 D Leaded
Presence sensors, fast proximity sensors • Narrow optical filter: www.vishay.com/doc?81590 • Wide optical filter: www.vishay.com/doc?82726
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Supply voltage (pin 3) Supply current (pin 3) Output voltage (pin 1) Voltage at output to supply Output current (pin 1) Junction temperature Storage temperature range Operating temperature range Power consumption
Tamb ≤ 85 °C
VS
-0.3 to +6.0
V
IS
5
mA
VO
-0.3 to 5.5
V
VS - VO
-0.3 to (VS + 0.3)
V
IO
5
mA
Tj
100
°C
Tstg
-25 to +85
°C
Tamb
-25 to +85
°C
Ptot
10
mW
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability.
Rev. 2.0, 02-Feb-2023
2
Document Number: 82780
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Datasheet Values Refer to PCN-OPT-1225-2022-REV-0
www.vishay.com
TSSP530..
Vishay Semiconductors
ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
Supply current (pin 3) Supply voltage Transmission distance Output voltage low (pin 1)
Ev = 0, VS = 3.3 V Ev = 40 klx, sunlight
Ev = 0, test signal see Fig. 1, IR diode TSAL6200, IF = 50 mA IOSL = 0.5 mA, Ee = 2 mW/m2,
test signal see Fig. 1
ISD ISH VS d
VOSL
0.25
0.35
0.45
-
0.45
-
2.0
-
5.5
-
12
-
-
-
100
Minimum irradiance
Pulse width tolerance:
tpi - 4/f0 < tpo < tpi + 4/f0,
Ee min.
-
test signal see Fig. 1
0.4
0.7
Maximum irradiance
Pulse width tolerance:
tpi - 4/f0 < tpo < tpi + 4/f0,
Ee max.
30
-
-
test signal see Fig. 1
Directivity
Angle of half transmission distance
ϕ1/2
-
± 45
-
UNIT mA mA V m mV
mW/m2
W/m2
°
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Ee Optical Test Signal (IR diode TSAL6200, 30 pulses, f = f0, T = 10 ms)
Optical Test Signal Ee
tpi (1)
T (1) tpi ≥ 10/f0
Output Signal
VO
(2) 7/f0 < td < 13/f0
VOH
(3) tpi - 4/f0 < tpo < tpi + 4/f0
VOL
td (2)
tpo (3)
Fig. 1 - Output Active Low
t
16110-12
t
600 µs
600 µs
t = 60 ms
Output Signal, (see Fig. 4) VO VOH
VOL
t on
t off
Fig. 3 - Output Function
t
94 8134
t
2nd line tpo - Output Pulse Width (ms)
1st line 2nd line 2nd line ton.