Retriggerable Monostable Multivibrator
HD74LS122
Retriggerable Monostable Multivibrator (with Clear)
REJ03D0428–0200 Rev.2.00
Feb.18.2005
This d-c triggered...
Description
HD74LS122
Retriggerable Monostable Multivibrator (with Clear)
REJ03D0428–0200 Rev.2.00
Feb.18.2005
This d-c triggered multivibrator features output pulse width control by three method. The basic pulse time is programmed by selection of external resistance and capacitance values. The HD74LS122 has internal timing resistor that allows the circuit to be used with only an external capacitor, if so desired. Once triggered, the basic pulse width may be extended by retriggering the gated low-level -active (A) or high-level active (B) inputs or be reduced by use of the overriding clear. Figure 1 illustrates pulse control by retriggering and early clear. This device is provided enough Schmitt hysteresis to ensure jitter-free triggering from the B input with transition rates as slow as 0.1 mV/ns.
A = "L" Clear = "H" B
Q
A = "L" B
Retrigger Pulse "H"
"L" tw + tPLH
"H"
tw
"L"
Output without retrigger
"H" "L"
Clear
"H" "L"
"H" Q
"L"
Output without clear
Figure 1
Typical Input / Output Pulse
Rev.2.00, Feb.18.2005, page 1 of 7
HD74LS122
Features
Ordering Information
Part Name
Package Type
Package Code (Previous Code)
Package Abbreviation
HD74LS122P
DILP-14 pin
PRDP0014AB-B (DP-14AV)
P
HD74LS122FPEL SOP-14 pin (JEITA)
PRSP0014DF-B (FP-14DAV)
FP
Note: Please consult the sales office for the above package availability.
Taping Abbreviation (Quantity) —
EL (2,000 pcs/reel)
Pin Arrangement
A1 1 A2 2 B1 3 B2 4 CLR 5 Q6 GND 7
CLR QQ
(Top view)
14 VCC 13 Rext/Cex...
Similar Datasheet