DUAL STEPPER MOTOR DRIVER
NJM3774
DUAL STEPPER MOTOR DRIVER
s GENERAL DESCRIPTION
The NJM3774 is a switch-mode (chopper), constantcurrent driver...
Description
NJM3774
DUAL STEPPER MOTOR DRIVER
s GENERAL DESCRIPTION
The NJM3774 is a switch-mode (chopper), constantcurrent driver with two channels: one for each winding of a two-phase stepper motor. The NJM3774 is equipped with a TTL level compatible Disable input to simplify half-stepping operation. The circuit is well suited for microstepping applications together with the matching dual DAC NJU39610. In full/half stepping applications, the NJM3517 can be used as a phase generator (translator) to derive the necessary signals for the NJM3774. The NJM3774 contains a clock oscillator, which is common for both driver channels, a set of comparators and flip-flops implementing the switching control, and two output H-bridges. Voltage supply requirements are +5 V for logic and +10 to +45 V for the motor. Maximum output current is 1000mA per channel.
s PACKAGE OUTLINE
NJM3774D2 NJM3774FM2
s FEATURES
Dual chopper driver 1000 mA continuous output current per channel Specially matched to the Dual DAC NJU39610 Packages DIP22 / PLCC28
s BLOCK DIAGRAM
Phase 1
Dis1 VR1
C1
NJM3774
VCC
V CC
– +
E1
RQ S
Logic
+ –
RC
Logic
+
SQ
R
–
Figure 1. Block diagram
Phase 2
Dis 2 VR2
C2
GND
E2
M A1 M B1
VMM1 VMM2
M B2 M A2
NJM3774
s PIN CONFIGURATIONS
M A1 12 GND 13 GND 14 GND 15 GND 16 GND 17 Dis 1 18
4 MA2 3 GND 2 GND 1 GND 28 GND 27 Dis 2 26 Phase2
VMM2 5 E2 6
M B2 7 M B1 8 GND 9
E1 10 VMM111
NJM3774FM2
25 VR2 24 C2 23 RC 22 VCC 21 C1 20 VR1 19 Phase1
RC 1
22 VCC
C2 2
...
Similar Datasheet