CAT37

CAT37 CMOS White LED Driver Boost Converter Description The CAT37 is a DC/DC step up converter that delivers a regulated output current. Operation at a constant switching frequency of 1.2 MHz allows the device to be used with very small value external inductor and ceramic capacitors. The CAT37 is targeted to drive multiple white light−emitting diodes (LEDs) connected in series and provides the necessary regulated current to control the brightness and the color purity. An external resistor R1 controls the output current level. LED currents of up to 40 mA can be supported over a wide range of input supply voltages from 2.5 V to 7 V, making the device ideal for battery−powered applications. A high voltage output stage allows up to 4 White LEDs to be driven in series. Series drive provides inherent current matching. LED dimming can be done by using a DC voltage, a logic signal, or a pulse width modulation (PWM) signal. The shutdown input pin allows the device to be placed in power−down mode with “near zero” quiescent current. In addition to overcurrent limiting protection, the device also includes detection circuitry to ensure protection against open−circuit load fault conditions. The device is available in a low profile (1 mm max height) 5−lead TSOT−23 package. Features Low Quiescent Ground Current (0.5 mA Typical) Power Efficiency Over 80% Compatible Pinout with LT1937 Adjustable Output Current (up to 40 mA) High Frequency 1.2 MHz Operation Input Voltage Operation ...