OPB701Z

Reflective Object Sensor OPB700Z, OPB700ALZ OPB701Z, OPB701ALZ Features: Low profile to facilitate stacking Low cost plastic housing Choice of phototransistor or photodarlington output #26 AWG lead wire in 4” (101 mm), or 18” (457 mm) lengths Description: OPB700 and OPB700ALZ sensors consist of an infrared emitting diode and a NPN silicon phototransistor, mounted side-byside on converging optical axes in a black plastic housing. OPB701 and OPB701ALZ sensors consist of an infrared emitting diode and a NPN silicon photodarlington, mounted side-byside on converging optical axes in a black plastic housing. The interconnect wires for these devices are are UL approved #26 AWG, with Teflon insulation, stripped and tinned. The OPB700 and OPB701 have 4” (101 mm) wire length while the OPB700ALZ and OPB701ALZ have 18” (457 mm) wire length. Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Non-contact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Part Number Door sensor OPB700Z OPB700ALZ OPB701Z OPB701ALZ LED Peak Wavelength 890 nm Ordering Information Sensor Reflection Distance Inch (mm) Transistor Darlington 0.200" (5.08mm) Lead Length / Spacing 4" / 26 AWG Wire 18" / 26 AWG Wire 4" / 26 AWG Wire 18" / 26 AWG Wire RoHS General Note TT Electronics reserves the right to make changes in product sp...