Programmable USB Type-C Controller
Programmable USB Type‐C Controller w/PD
FUSB302T
Description The FUSB302T targets system designers looking to implemen...
Description
Programmable USB Type‐C Controller w/PD
FUSB302T
Description The FUSB302T targets system designers looking to implement
USB Type−C wall charger or Travel adaptor. In addition to the default SRC function, the device supports DRP/ SRC/ SNK with low amount of programmability.
The FUSB302T enables the USB Type-C detection including attach/detach, and orientation. The FUSB302T integrates the physical layer of the USB BMC power delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.
Features
Dual-role Functionality with Autonomous DRP Toggle Ability to Connect as Either a Host or a Device Based on What Has
Been Attached
Software Configurable Either as a Dedicated Host, Dedicated
Device, or Dual Role ♦ Dedicated Devices can Operate both on a Type-C Receptacle or
a Type-C Plug with a Fixed CC and VCONN Channel
Full Type-C 1.2 Support. Integrates the Following Functionality of
the CC Pin: ♦ Attach/Detach Detection as Host ♦ Current Capability Indication as Host ♦ Current Capability Detection as Device ♦ Audio Adapter Accessory Mode ♦ Debug Accessory Mode ♦ Active Cable Detection
Integrates CCx to VCONN Switch with Over-current Limiting for
Powering USB3.1 Full Featured Cables
USB Power Delivery (PD) 2.0 Support:
♦ Automatic GoodCRC Packet Response ♦ Automatic Retries of Sending a Packet if a GoodCRC is Not
Received ♦ Automatic Soft Reset Packet Sent with Retries if Needed...
Similar Datasheet