SN75ALS172A QUADRUPLE DIFFERENTIAL LINE DRIVER
SLLS121D – AUGUST 1990 – REVISED APRIL 1998
D Meets or Exceeds ANSI Sta...
SN75ALS172A QUADRUPLE DIFFERENTIAL LINE DRIVER
SLLS121D – AUGUST 1990 – REVISED APRIL 1998
D Meets or Exceeds ANSI Standards
EIA/TIA-422-B and RS-485 and ITU Recommendation V.11
D High-Speed Advanced Low-Power
Schottky
Circuitry
D Designed for 20-MBaud Operation in Both
Serial and Parallel Applications
D Designed for Multipoint Transmission on
Long Bus Lines in Noisy Environments
D Low Supply-Current Requirements:
55 mA Max
D Wide Positive and Negative Input/Output
Bus-Voltage Ranges
D Driver Output Capacity . . . ±60 mA D Thermal Shutdown Protection D Driver Positive and Negative Current
Limiting
D Logically Interchangeable With SN75172
description
The SN75ALS172A comprises four line drivers with 3-state differential outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B and RS-485 and ITU Recommendation V.11. This device is optimized for balanced multipoint bus transmission at rates of up to 20 Mbaud. Each driver features wide positive and negative common-mode output voltage ranges, making it suitable for party-line applications in noisy environments.
N PACKAGE (TOP VIEW)
1A 1 1Y 2 1Z 3 G4 2Z 5 2Y 6 2A 7 GND 8
16 VCC 15 4A 14 4Y 13 4Z 12 G 11 3Z 10 3Y 9 3A
DW PACKAGE (TOP VIEW)
1A 1 1Y 2 NC 3 1Z 4 G5 2Z 6 NC 7 2Y 8 2A 9 GND 10
20 VCC 19 4A 18 4Y 17 NC 16 4Z 15 G 14 3Z 13 NC 12 3Y 11 3A
NC – No internal connection
The SN75ALS172A provides positive- and negative-current limiting and thermal shutdown for protection from line-fault conditi...