0.5A to 2.0A HIGH-SIDE POWER DISTRIBUTION SWITCHES
NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART
AP2822
0.5A to 2.0A HIGH-SIDE POWER DISTRIBUTION SWITCHES
Descriptio...
Description
NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART
AP2822
0.5A to 2.0A HIGH-SIDE POWER DISTRIBUTION SWITCHES
Description
The AP2822 is an integrated high-side power switch that consists of NChannel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS(ON), 85mΩ is designed to meet USB voltage drop requirements. The IC includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller.
The AP2822 is available in the standard package of SOT-23-5.
Features
Low MOSFET On Resistance: 85mΩ Compliant to USB Specifications Available 4 Versions of Continuous Load: 0.5A/1.0A/1.5A/2.0A Logic Level Enable Pin: Available with Active-high or Active-low
Version Operating Voltage Range: 2.7V to 5.5V Low Supply Current: 68µA (Typ.) Low Shutdown Current: 1.0µA (Max) Under-voltage Lockout Soft Start-up Over-current Protection Over Temperature Protection Load Short Protection with Fold-back No Reverse Current When Power Off Deglitched FLAG Output with Open Drain With Output Shutdown Pull-low Resistor
(For Auto-discharge) (AP2822A/AP2822B/AP2822C/AP2822D/AP2822E/AP2822F/AP 2822G/AP2822H) Without Output...
Similar Datasheet