Dual 4-Line To 1-Line Data Selectors/Multiplexers
SN54HC153, SN74HC153
SCLS112E – DECEMBER 1982 – REVISED FEBRUARY 2022
SNx4HC153 Dual 4-Line To 1-Line Data Selectors/Mul...
Description
SN54HC153, SN74HC153
SCLS112E – DECEMBER 1982 – REVISED FEBRUARY 2022
SNx4HC153 Dual 4-Line To 1-Line Data Selectors/Multiplexers
1 Features
Wide operating voltage range of 2 V to 6 V Outputs can drive up to 15 LSTTL loads Low power consumption, 80-μA max ICC Typical tpd = 9 ns ±6-mA output drive at 5 V Low input current of 1 μA max Permit multiplexing from n lines to one line Perform parallel-to-serial conversion Strobe (enable) line provided for cascading
(N lines to n lines)
2 Description
The SNx4HC153 is a dual data selector/multiplexer containing full binary decoding to select one of four data sources. Both channels are controlled by the same address select inputs, and each channel includes its own strobe (G) input. A high level at the strobe terminal forces the repective output low.
PART NUMBER SN74HC153D SN74HC153N SN74HC153NS SN74HC153PW SN54HC153J SNJ54HC153FK
Device Information
PACKAGE(1) BODY SIZE (NOM)
SOIC (16)
9.90 mm × 3.90 mm
PDIP (16)
19.31 mm × 6.35 mm
SO (16)
6.20 mm × 5.30 mm
TSSOP (16) 5.00 mm × 4.40 mm
CDIP (16)
24.38 mm × 6.92 mm
LCCC (20)
8.89 mm × 8.45 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
Pin numbers are for the D, J, N, NS, PW, and W packages. Functional Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRO...
Similar Datasheet