CMOS Operational Amplifier
LMC6035, LMC6035-Q1, LMC6036
www.ti.com
SNOS875G – JANUARY 2000 – REVISED APRIL 2013
LMC6035/LMC6035-Q1/LMC6036 Low P...
Description
LMC6035, LMC6035-Q1, LMC6036
www.ti.com
SNOS875G – JANUARY 2000 – REVISED APRIL 2013
LMC6035/LMC6035-Q1/LMC6036 Low Power 2.7V Single Supply CMOS Operational Amplifiers
Check for Samples: LMC6035, LMC6036
FEATURES
1
2 (Typical Unless Otherwise Noted) LMC6035 in DSBGA Package Ensured 2.7V, 3V, 5V and 15V Performance Specified for 2 kΩ and 600Ω Loads Wide Operating Range: 2.0V to 15.5V Ultra Low Input Current: 20fA Rail-to-Rail Output Swing
– @ 600Ω: 200mV from Either Rail at 2.7V – @ 100kΩ: 5mV from Either Rail at 2.7V High Voltage Gain: 126dB Wide Input Common-Mode Voltage Range – -0.1V to 2.3V at VS = 2.7V Low Distortion: 0.01% at 10kHz LMC6035 Dual LMC6036 Quad See AN-1112 (Literature Number SNVA009) for DSBGA Considerations AEC-Q100 Grade 3 Qualified (LMC6035-Q1)
APPLICATIONS
Filters
High Impedance Buffer or Preamplifier
Battery Powered Electronics
Medical Instrumentation
Automotive Applications
DESCRIPTION
The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package (8-Bump DSBGA) using micro SMD package technology. Both allow for single supply operation and are ensured for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in it...
Similar Datasheet