Power-Distribution Switches
www.ti.com
TPS2530
SLUSB67 – AUGUST 2012
Current-Limited, Power-Distribution Switches
Check for Samples: TPS2530
FEAT...
Description
www.ti.com
TPS2530
SLUSB67 – AUGUST 2012
Current-Limited, Power-Distribution Switches
Check for Samples: TPS2530
FEATURES
1
2 Single Power Switch Pin for Pin with Existing TI Switch Portfolio™ Rated Currents of 0.5 A ±25% Accurate, Fixed, Constant Current Limit Fast Over-Current Response – 2 µs Operating Range: 2.7 V to 5.5 V Deglitched Fault Reporting Reverse Current Blocking Built-in Softstart Ambient Temperature Range: –40°C to 85°C
APPLICATIONS
DisplayPort USB Ports/Hubs, Laptops, Desktops Set Top Boxes Short-Circuit Protection
DESCRIPTION
The TPS2530 power-distribution switch is intended for applications such as DisplayPort or USB Port where heavy capacitive loads and short-circuits are likely to be encountered. It offers 0.5 A fixed currentlimit thresholds.
The TPS2530 limits the output current to a safe level by operating in a constant-current mode when the output load exceeds the current-limit threshold. This provides a predictable fault current under all conditions. The fast overload response time eases the burden on the main supply to provide regulated power when the output is shorted. The power-switch rise and fall times are controlled to minimize current surges during turn-on and turn-off.
TYPICAL APPLICATION
TPS2530
VIN
RFLT 10 kΩ
0.1 μF
IN
OUT
VOUT
150 μF
Fault Signal Control Signal
FLT
GND EN
Figure 1. Typical Application
MAXIMUM OPERATING CURRENT 0.5
DEVICE INFORMATION(1)
ENABLE
BASE PART NUMBER
High
TPS2530
PAC...
Similar Datasheet