Precision Adjustable Current-Limited Power-Distribution Switches
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TPS2556, TPS2557
SLVS931B – NO...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
TPS2556, TPS2557
SLVS931B – NOVEMBER 2009 – REVISED DECEMBER 2016
TPS255x Precision Adjustable Current-Limited Power-Distribution Switches
1 Features
1 Meets USB Current-Limiting Requirements Adjustable Current Limit, 500 mA to 5 A (Typical) ±6.5% Current-Limit Accuracy at 4.5 A Fast Overcurrent Response: 3.5-µs (Typical) 22-mΩ High-Side MOSFET Operating Voltage: 2.5 V to 6.5 V 2-µA Maximum Standby Supply Current Built-in Soft Start 15-kV and 8-kV System-Level ESD Capable UL Listed: File No. E169910 and CB IEC60950-1-
am2 ed2.0
2 Applications
USB Ports and Hubs Digital TVs Set-Top Boxes VOIP Phones
3 Description
The TPS255x power-distribution switch is intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 500 mA and 5 A (typical) through an external resistor. The power-switch rise and fall times are controlled to minimize current surges during turnon and turnoff.
TPS255x devices limit the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULT logic output asserts low during overcurrent and overtemperature conditions.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS2556, TPS2557 VSON (8)
3.00 mm × 3.00 mm
(1) For...
Similar Datasheet