Precision Adjustable Current-Limited Power-Distribution Switch
www.ti.com
TPS2559 SLVSCL5A – JUNE 2014 – REVISED NOVEMTPBESR22505290
SLVSCL5A – JUNE 2014 – REVISED NOVEMBER 2020
TPS...
Description
www.ti.com
TPS2559 SLVSCL5A – JUNE 2014 – REVISED NOVEMTPBESR22505290
SLVSCL5A – JUNE 2014 – REVISED NOVEMBER 2020
TPS2559 Precision Adjustable Current-Limited Power-Distribution Switch
1 Features
Operating range: 2.5 V to 6.5 V Adjustable 1.2-A to 4.7-A I(LIMIT) (±4.4% at 4.7 A) Short-circuit shutoff (typical): 3.5 µs High-side MOSFET: 13 mΩ Maximum standby supply current: 2 µA Built-in soft-start System-level ESD capable: 8 kV / 15 kV UL 2367 recognition pending
2 Applications
USB ports, hubs Digital TVs Set-top boxes VOIP phones
3 Description
The TPS2559 power-distribution switch is intended for applications where a low resistance, precision current limit switch is required or heavy capacitive loads are encountered. The TPS2559 provides up to 5.5 A of continuous load current with a precise current limit set by a single resistor to ground. Output current is maintained at a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. During overload events the output current is limited to the level set by R(ILIM). If a persistent overload occurs, the device goes into thermal shutoff to prevent damage to the TPS2559.
The power-switch rise and fall times are controlled to minimize current surges during turn on or off. The FAULT logic output asserts low during overcurrent or overtemperature conditions.
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS2559
VSON (10)
3.00 mm x 3.00...
Similar Datasheet