32-bit ARM Cortex-M0+ microcontroller
LPC83x
32-bit ARM® Cortex®-M0+ microcontroller; up to 32 KB flash and 4 KB SRAM; 12-bit ADC
Rev. 1.2 — 4 April 2018
P...
Description
LPC83x
32-bit ARM® Cortex®-M0+ microcontroller; up to 32 KB flash and 4 KB SRAM; 12-bit ADC
Rev. 1.2 — 4 April 2018
Product data sheet
1. General description
The LPC83x are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC83x support up to 32 KB of flash memory and 4 KB of SRAM.
The peripheral complement of the LPC83x includes a CRC engine, one I2C-bus interface, one USART, up to two SPI interfaces, one multi-rate timer, self-wake-up timer, and SCTimer/PWM, a DMA, one 12-bit ADC, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 29 general-purpose I/O pins.
For additional documentation related to the LPC83x parts, see Section 18.
2. Features and benefits
System: ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port. ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC). System tick timer. AHB multilayer matrix. Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported. Macro Trace Buffer (MTB).
Memory: Up to 32 KB on-chip flash programming memory with 64 Byte page write and erase. Code Read Protection (CRP) supported. 4 KB SRAM.
ROM API support: Boot loader. Flash In-Application Programming (IAP) and In-System Programming (ISP).
Digital peripherals: High-speed GPIO interface connected to the ARM...
Similar Datasheet