8T39S04A

Crystal or Differential to Differential Clock Fanout Buffer 8T39S04A Datasheet Description The 8T39S04A is a high-performance clock fanout buffer. The input clock can be selected from two differential inputs or one crystal input. The internal oscillator circuit is automatically disabled if the crystal input is not selected. The crystal pin can be driven by a single-ended clock. The selected signal is distributed to four differential outputs which can be configured as LVPECL, LVDS or HSCL outputs. In addition, an LVCMOS output is provided. All outputs can be disabled into a high-impedance state. The device is designed for a signal fanout of high-frequency, low phase-noise clock and data signal. The outputs are at a defined level when inputs are open or tied to ground. It is designed to operate from a 3.3V or 2.5V core power supply, and either a 3.3V or 2.5V output operating supply. Block Diagram PullDown PullDown Features Two differential reference clock input pairs Differential input pairs can accept the following input levels: LVPECL, LVDS, HCSL, HSTL and Single-ended Crystal Oscillator Interface Crystal input frequency range: 10MHz to 40MHz Maximum Output Frequency LVPECL - 2GHz LVDS HCSL - 2GHz - 250MHz LVCMOS - 250MHz Two banks, each has two differential output pairs that can be configured as LVPECL or LVDS or HCSL One single-ended reference output with synchronous enable to avoid clock glitch Output skew: 80ps (maximum), Bank A and Bank B at...