CURRENT-SHUNT MONITOR
INA216
www.ti.com
SBOS503C – JUNE 2010 – REVISED NOVEMBER 2011
Small Size, Low-Power, Unidirectional, CURRENT SHUNT MO...
Description
INA216
www.ti.com
SBOS503C – JUNE 2010 – REVISED NOVEMBER 2011
Small Size, Low-Power, Unidirectional, CURRENT SHUNT MONITOR Zerø-Drift Series
Check for Samples: INA216
FEATURES
1
2 CHIP-SCALE PACKAGE COMMON-MODE RANGE: +1.8V to +5.5V OFFSET VOLTAGE: ±30μV GAIN ERROR: ±0.2% MAX CHOICE OF GAINS:
– INA216A1: 25V/V – INA216A2: 50V/V – INA216A3: 100V/V – INA216A4: 200V/V QUIESCENT CURRENT: 13μA BUFFERED VOLTAGE OUTPUT: No Additional Op Amp Needed
APPLICATIONS
NOTEBOOK COMPUTERS CELL PHONES TELECOM EQUIPMENT POWER MANAGEMENT BATTERY CHARGERS
DESCRIPTION
The INA216 is a high-side voltage output current shunt monitor that can sense drops across shunts at common-mode voltages from +1.8V to +5.5V. Four fixed gains are available: 25V/V, 50V/V, 100V/V, and 200V/V. The low offset of the Zerø-Drift architecture enables current sensing with maximum drops across the shunt as low as 10mV full-scale, or with wide dynamic ranges of over 1000:1.
These devices operate from a single +1.8V to +5.5V power supply, drawing a maximum of 25μA of supply current. The INA216 series are specified over the temperature range of –40°C to +125°C, and offered in a chip-scale package.
Supply: +1.8V to +5.5V
Shunt
Load
R1
R2
IN+
IN-
1.6MW
1.6MW
GND
OUT
PRODUCT
INA216A1 INA216A2 INA216A3 INA216A4
GAIN
25 50 100 200
R1 = R2
64kW 32kW 16kW 8kW
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Inst...
Similar Datasheet