2-A Continuous Current-Limited Switch
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS25221
SLVSDT3D – JANUARY 2018 ...
Description
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS25221
SLVSDT3D – JANUARY 2018 – REVISED DECEMBER 2019
TPS25221 2.5-V to 5.5-V, 2-A Continuous Current Limited Switch
1 Features
1 2.5-V to 5.5-V VOPERATING Pin-to-Pin with TPS2553 2-A ICONT_MAX 0.275-A to 2.7-A Adjustable ILIMIT (±6.5% at 1.7 A) 70-mΩ (typical) RON 1.5-µs Short Circuit Response 8-ms Fault Reporting Deglitch Reverse Current Blocking (when disabled) Built-In Soft Start UL 60950 and UL 62368 Recognition 15-kV ESD Protection per IEC 61000-4-2 (with
external capacitance)
2 Applications
USB Ports/Hubs, Laptops, Desktops HDTV Set Top Boxes Optical Socket Protection
3 Description
The TPS25221 is intended for applications where heavy capacitive loads and short circuits may be encountered. The programmable current-limit threshold maybe set between 275 mA and 2.7 A (typical) using an external resistor. ILIMIT accuracy as tight as ±6% can be achieved at the higher currentlimit settings. Power-switch rise and fall times are controlled to minimize current surges during turn on and turn off.
When a load attempts to draw current exceeding the programmed ILIMIT the internal FET enters constant current mode in order to keep ILOAD at or below ILIMIT. The FAULT output will assert low during over-current conditions after the built in de-glitch time.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS25221
SOT-23 (6) WSON (6)
2.90 mm x 1.60 mm 2...
Similar Datasheet