Voltage Translator
TXS0108E-Q1
SCES861C – JUNE 2015 – REVISED JULY 2023
TXS0108E-Q1 8-Bit Bi-directional, Level-Shifting, Voltage Translato...
Description
TXS0108E-Q1
SCES861C – JUNE 2015 – REVISED JULY 2023
TXS0108E-Q1 8-Bit Bi-directional, Level-Shifting, Voltage Translator for Open-Drain and Push-Pull Applications
1 Features
AEC-Q100 Qualified for Automotive Applications – Device Temperature Grade 1: –40°C to 125°C
– Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C6 No Direction-Control Signal Needed Maximum Data Rates – 110 Mbps (Push Pull) – 1.2 Mbps (Open Drain) 1.4 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB) No Power-Supply Sequencing Required – Either VCCA or VCCB Can Be Ramped First Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD 22 (A Port) – 2000 V Human Body Model (A114-B) – 1000 V Charged-Device Model (C101) IEC 61000-4-2 ESD (B Port) – ±8 kV Contact Discharge – ±6 kV Air-Gap Discharge
2 Applications
Automotive
3 Description
This device is a 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4 V and 3.6 V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65 V and 5.5 V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state.
To ensure the ...
Similar Datasheet