TXS02326A
www.ti.com
SCES830A – MAY 2012 – REVISED AUGUST 2013
DUAL-SUPPLY 2:1 SIM CARD MULTIPLEXER/TRANSLATOR WITH A...
TXS02326A
www.ti.com
SCES830A – MAY 2012 – REVISED AUGUST 2013
DUAL-SUPPLY 2:1 SIM CARD MULTIPLEXER/TRANSLATOR WITH AUTOMATIC DETECTION AND SLOT DEDICATED DUAL LDO
Check for Samples: TXS02326A
FEATURES
1
Level Translator – VDDIO Range of 1.7-V to 3.3-V
Low-Dropout (LDO)
Regulator – 50-mA LDO
Regulator With Enable – 1.8-V or 2.95-V Selectable Output Voltage – 2.3-V to 5.5-V Input Voltage Range – Very Low Dropout: 100 mV (Max) at 50 mA
Control and Communication Through I2C Interface With Baseband Processor
ESD Protection Exceeds JESD 22 – 2500-V Human-Body Model (A114-B) – 6000-V Human-Body Model (A114-B) on VSIM1, SIM1CLK, SIM1I/O, SIM1RST, VSIM2, SIM2CLK, SIM2I/O, SIM2RST – 1000-V Charged-Device Model (C101)
Package – 24-Pin QFN (4 mm x 4 mm)
RGE PACKAGE (TOP VIEW)
SDA SCK CLK VDDIO GND OE
IRQ RSTX
SDN BSI SIM2CLK SIM2I/O
24 23 22 21 20 19
1
18
2
17
3
Exposed 16
4 Thermal Pad 15
5
14
6
13
7 8 9 10 11 12
SIMI/O SIMCLK SIMRST NC SIM1CLK SIM1I/O
SIM2RST VSIM2 VBAT GND VSIM1
SIM1RST
Note: The Exposed Thermal Pad must be connect to Ground.
DESCRIPTION/ORDERING INFORMATION
The TXS02326A is a complete dual-supply standby Smart Identity Module (SIM) card solution for interfacing wireless baseband processors with two individual SIM subscriber cards to store data for mobile handset applications. It is a custom device which is used to extend a single SIM/UICC interface to support two SIMs/UICCs.
The device complies with ISO/IEC Smart-Card Interface requ...