FULLY-DIFFERENTIAL AMPLIFIER
THS4511
www.ti.com
SLOS471E – SEPTEMBER 2005 – REVISED NOVEMBER 2009
WIDEBAND, LOW-NOISE, LOW-DISTORTION, FULLY-DIFFER...
Description
THS4511
www.ti.com
SLOS471E – SEPTEMBER 2005 – REVISED NOVEMBER 2009
WIDEBAND, LOW-NOISE, LOW-DISTORTION, FULLY-DIFFERENTIAL AMPLIFIER
Check for Samples: THS4511
FEATURES
1
2 Fully-Differential Architecture Common-Mode Input Range Includes
the Negative Rail Unity-Gain Stable Bandwidth: 1.6 GHz (Gain = 0 dB) Slew Rate: 4900 V/µs 1% Settling Time: 3.3 ns HD2: –72 dBc at 70 MHz HD3: –87 dBc at 70 MHz OIP2: 76 dBm at 70 MHz OIP3: 42 dBm at 70 MHz Input Voltage Noise: 2 nV/√Hz (f > 10 MHz) Noise Figure: 21.8 dB (50-Ω System, G = 6 dB) Output Common-Mode Control 5-V Power-Supply Current: 39.2 mA Power-Down Capability: 0.65 mA
APPLICATIONS
5-V Data-Acquisition Systems High Linearity ADC Amplifiers Wireless Communication Medical Imaging Test and Measurement
RELATED PRODUCTS
DEVICE THS4508 THS4509 THS4511 THS4513
COMMON-MODE RANGE OF MIN. GAIN INPUT(1)
6 dB –0.3 V to 2.3 V 6 dB 0.75 V to 4.25 V 0 dB –0.3 V to 2.3 V 0 dB 0.75 V to 4.25 V
1. Assumes a 5-V single-ended power supply.
DESCRIPTION
The THS4511 is a wideband, fully-differential operational amplifier designed for single-supply 5-V data-acquisition systems. It has very low noise at 2 nV/√Hz, and extremely low harmonic distortion of –72 dBc HD2 and –87 dBc HD3 at 70 MHz with 2 VPP, G = 0 dB, and 200-Ω load. Slew rate is very high at 4900 Vµs and with settling time of 3.3 ns to 1% (2 V step) it is ideal for pulsed applications. It is designed for minimum gain of 0 dB.
To allow for d...
Similar Datasheet