DatasheetsPDF.com

FT232RL Dataheets PDF



Part Number FT232RL
Manufacturers FTDI
Logo FTDI
Description USB UART
Datasheet FT232RL DatasheetFT232RL Datasheet (PDF)

FT232R USB UART IC Datasheet Version 2.16 Document No.: FT_000053 Clearance No.: FTDI# 38 Future Technology Devices International Ltd. FT232R USB UART IC Datasheet The FT232R is a USB to serial UART interface  with the following advanced features:  Single chip USB to asynchronous serial data  transfer interface.  Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 1024 bit EEPROM storing  device descriptors and CBUS I/O configurat.

  FT232RL   FT232RL



Document
FT232R USB UART IC Datasheet Version 2.16 Document No.: FT_000053 Clearance No.: FTDI# 38 Future Technology Devices International Ltd. FT232R USB UART IC Datasheet The FT232R is a USB to serial UART interface  with the following advanced features:  Single chip USB to asynchronous serial data  transfer interface.  Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 1024 bit EEPROM storing  device descriptors and CBUS I/O configuration.  Fully integrated USB termination resistors.   Fully integrated clock generation with no  external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.   Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.   128 byte receive buffer and 256 byte transmit  buffer utilising buffer smoothing technology to allow for high data throughput.   FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the  requirement for USB driver development in most cases.   Unique USB FTDIChip-ID™ feature.   Configurable CBUS I/O pins.   Transmit and receive LED drive signals.   UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space /  no parity   FIFO receives and transmits buffers for high data throughput. Synchronous and asynchronous bit bang interface options with RD# and WR# strobes. Device supplied pre-programmed with unique USB serial number. Supports bus powered, self-powered and highpower bus powered USB configurations. Integrated +3.3V level converter for USB I/O. Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic. True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input. Configurable I/O pin output drive strength. Integrated power-on-reset circuit. Fully integrated AVCC supply filtering - no external filtering required. UART signal inversion option. +3.3V (using external oscillator) to +5.25V (internal oscillator) Single Supply Operation. Low operating and USB suspend current. Low USB bandwidth consumption. UHCI/OHCI/EHCI host controller compatible. USB 2.0 Full Speed compatible. -40°C to 85°C extended operating temperature range. Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant). Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this produ ct. Your statutory rights are not affected. This product or any variant of it is not intended for.


FT232RQ FT232RL Si5345


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)