Power Operational Amplifier
LM675
www.ti.com
SNOSBP3E – MAY 1999 – REVISED MARCH 2013
LM675 Power Operational Amplifier
Check for Samples: LM675
...
Description
LM675
www.ti.com
SNOSBP3E – MAY 1999 – REVISED MARCH 2013
LM675 Power Operational Amplifier
Check for Samples: LM675
FEATURES
1
2 3A Current Capability AVO Typically 90 dB 5.5 MHz Gain Bandwidth Product 8 V/μs Slew Rate Wide Power Bandwidth 70 kHz 1 mV Typical Offset Voltage Short Circuit Protection Thermal Protection with Parole Circuit (100%
Tested) 16V–60V Supply Range Wide Common Mode Range Internal Output Protection Diodes 90 dB Ripple Rejection Plastic Power Package TO-220
Connection Diagram
*The tab is internally connected to pin 3 (−VEE)
Figure 1. Front View TO-220 Power Package (NDH) See Package Number NDH0005D Typical Applications
APPLICATIONS
High Performance Power Op Amp Bridge Amplifiers Motor Speed Controls Servo Amplifiers Instrument Systems
DESCRIPTION
The LM675 is a monolithic power operational amplifier featuring wide bandwidth and low input offset voltage, making it equally suitable for AC and DC applications.
The LM675 is capable of delivering output currents in excess of 3 amps, operating at supply voltages of up to 60V. The device overload protection consists of both internal current limiting and thermal shutdown. The amplifier is also internally compensated for gains of 10 or greater.
Figure 2. Non-Inverting Amplifier
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears...
Similar Datasheet