SYNCHRONOUS BUCK DC-TO-DC CONTROLLER
TPS40042
www.ti.com
SLUS777 – NOVEMBER 2007
LOW PIN COUNT, LOW VIN (3.0 V TO 5.5 V) SYNCHRONOUS BUCK DC-TO-DC CONTROL...
Description
TPS40042
www.ti.com
SLUS777 – NOVEMBER 2007
LOW PIN COUNT, LOW VIN (3.0 V TO 5.5 V) SYNCHRONOUS BUCK DC-TO-DC CONTROLLER WITH EXTERNAL REFERENCE INPUT
FEATURES
1
2 3.0-V to 5.5-V Input External Reference required: 0.5 V to 1.5 V Output Voltage from REFIN to 90% of VIN High-Side Drive for N-Channel FET Supports Pre-Biased Outputs Adaptive Anti-Cross Conduction Gate Drive Fixed switching frequency (600 kHz) Voltage
Mode Control Three Selectable Short Circuit Protection
Levels Hiccup Restart from Faults Active Low Enable Thermal Shutdown Protection at 145°C 10-Pin, 3-mm x 3-mm SON (DRC)
APPLICATIONS
DDR Memory Point of Load Telecommunications DC to DC Modules
CONTENTS
Device Ratings
2
Electrical Characteristics
4
Device Information
8
Application Information
10
Design Examples
18
Additional References
28
DESCRIPTION
The TPS40042 DC/DC controller is designed to operate with an input source between a 3.0 V and 5.5 V. To reduce the number of external components, a number of operating parameters are fixed internally. The operating frequency for example, is internally set at 600 kHz. (Continued)
VIN Reference Input Enable
TPS40042
1 REFIN
HDRV 10
2 EN
SW 9
3 FB
BOOT 8
4 COMP
LDRV 7
5 VDD
GND 6
VOUT
UDG-07141
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this dat...
Similar Datasheet