DUAL DIFFERENTIAL COMPARATOR
www.ti.com
LM293-EP DUAL DIFFERENTIAL COMPARATOR
SLCS155 – OCTOBER 2007
FEATURES
1
• Controlled Baseline
– One Assembl...
Description
www.ti.com
LM293-EP DUAL DIFFERENTIAL COMPARATOR
SLCS155 – OCTOBER 2007
FEATURES
1
Controlled Baseline
– One Assembly
– Test Site
– One Fabrication Site
Extended Temperature Performance of –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product Change Notification Qualification Pedigree (1) Single Supply or Dual Supplies Wide Range of Supply Voltage
– Max Rating . . . 2 V to 36 V
– Tested to 30 V
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold-compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Low Supply-Current Drain Independent of Supply Voltage . . . 0.4 mA Typical Per Comparator
Low Input Bias Current . . . 25 nA Typical Low Input Offset Voltage . . . 2 mV Typical Common-Mode Input Voltage Range Includes
Ground Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS
LM293 . . . D PACKAGE (TOP VIEW)
1OUT 1 1IN– 2 1IN+ 3 GND 4
8 VCC 7 2OUT 6 2IN– 5 2IN+
DESCRIPTION/ORDERING INFORMATION
This device consist of two independent voltag...
Similar Datasheet