LM2940QML, LM2940QML-SP
www.ti.com
SNVS389B – MAY 2010 – REVISED MAY 2013
LM2940QML 1A Low Dropout Regulator
Check fo...
LM2940QML, LM2940QML-SP
www.ti.com
SNVS389B – MAY 2010 – REVISED MAY 2013
LM2940QML 1A Low Dropout
Regulator
Check for Samples: LM2940QML, LM2940QML-SP
FEATURES
1
2 Available with Radiation Ensure – ELDRS Free 100 krad(Si)
Dropout Voltage Typically 0.5V @IO = 1A Output Current in Excess of 1A Output Voltage Trimmed Before Assembly Reverse Battery Protection Internal Short Circuit Current Limit Mirror Image Insertion Protection
DESCRIPTION
The LM2940 positive voltage
regulator features the ability to source 1A of output current with a dropout voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 30 mA. Higher quiescent currents only exist when the
regulator is in the dropout mode (VIN − VOUT ≤ 3V).
Designed also for vehicular applications, the LM2940 and all regulated circuitry are protected from reverse battery installations or 2-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the
regulator will automatically shut down to protect both the internal circuits and the load. The LM2940 cannot be harmed by temporary mirrorimage insertion. Famili...