LM25115A

LM25115A www.ti.com SNVS501B – FEBRUARY 2007 – REVISED APRIL 2013 LM25115A Secondary Side Post Regulator/DC-DC Converter with Power-Up/Power-Down Tracking Check for Samples: LM25115A FEATURES 1 2 Power-up/Power-down Tracking Self-synchronization to Main Channel Output Leading Edge Pulse Width Modulation Valley Current Mode Control Standalone DC/DC Synchronous Buck Mode Operates from AC or DC Input up to 42V Wide 4.5V to 30V Bias Supply Range Wide 0.75V to 13.5V Output Range. Top and Bottom Gate Drivers Sink 2.5A Peak Adaptive Gate Driver Dead-time Control Wide Bandwidth Error Amplifier (4MHz) Programmable Soft-start Thermal Shutdown Protection TSSOP-16 package DESCRIPTION The LM25115A controller contains all of the features necessary to produce multiple tracking outputs using the Secondary Side Post Regulation (SSPR) technique. The SSPR technique develops a highly efficient and well regulated auxiliary output from the secondary side switching waveform of an isolated power converter. LM25115A can be also used as a standalone DC/DC synchronous buck controller (Refer to Standalone DC/DC Synchronous Buck Mode section). Regulation of the auxiliary output voltage is achieved by leading edge pulse width modulation (PWM) of the main channel duty cycle. Leading edge modulation is compatible with either current mode or voltage mode control of the main output. The LM25115A drives external high-side and low-side NMOS power switches configured as a synchron...