EIA-485/EIA-422A Differential Bus Transceiver
DS16F95QML
www.ti.com
SNOSAN0B – SEPTEMBER 2005 – REVISED APRIL 2013
DS16F95QML EIA-485/EIA-422A Differential Bus Tra...
Description
DS16F95QML
www.ti.com
SNOSAN0B – SEPTEMBER 2005 – REVISED APRIL 2013
DS16F95QML EIA-485/EIA-422A Differential Bus Transceiver
Check for Samples: DS16F95QML
FEATURES
1
2 Radiation Ensured 300 krad(Si) Meets EIA-485 and EIA-422A Meets SCSI-1 (5 MHZ) Specifications Designed for Multipoint Transmission Wide Positive and Negative Input/Output Bus
Voltage Ranges Thermal Shutdown Protection Driver Positive and Negative Current-Limiting High Impedance Receiver Input Receiver Input Hysteresis of 50 mV Typical Operates from Single 5.0V Supply Reduced Power Consumption Pin Compatible with DS3695 and SN75176A
DESCRIPTION
The DS16F95 Differential Bus Transceiver is a monolithic integrated circuit designed for bidirectional data communication on balanced multipoint bus transmission lines. The transceiver meets EIA standard RS-485 as well as RS-422A.
The DS16F95 offers improved performance due to the use of state-of-the-art L-FAST bipolar technology. The L-FAST technology allows for higher speeds and lower currents by utilizing extremely short gate delay times. Thus, the DS16F95QML features lower power, extended temperature range and improved specifications.
The DS16F95 combines a TRI-STATE differential line driver and a differential input line receiver, both of which operate from a single 5.0V power supply. The driver and receiver have an active Enable that can be externally connected to function as a direction control. The driver differential outputs and the re...
Similar Datasheet