TLC3702-Q1

Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TLC3702-Q1 SGLS156F – MARCH 2003 – REVISED DECEMBER 2016 TLC3702-Q1 Dual Micropower LinCMOS™ Voltage Comparators 1 Features 1 Qualified for Automotive Applications AEC-Q100 Qualified With the Following Results: – Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range – Device HBM ESD Classification Level H2 – Devce CDM ESD Classification Level C4B Push-Pull CMOS Output Drives Capacitive Loads Without Pullup Resistor, IO = ± 8 mA Very Low Power…100 µW Typical at 5 V Fast Response Time… tPLH = 2.7 µs Typical With 5-mV Overdrive Single-Supply Operation…3 V to 16 V On-Chip ESD Protection 2 Applications Transmission Control Unit Braking Engine Control 3 Description The TLC3702-Q1 consists of two independent micropower voltage comparators. Compared to similar devices, the TLC3702-Q1 uses one-twentieth of the power for similar response times. This allows the device to react quickly to fast changing signals while extending the battery life. The push-pull CMOS output stage drives capacitive loads directly without a power consuming pullup resistor to achieve the stated response time. Eliminating the pullup resistor not only reduces power dissipation but also saves board space and component cost. Additionally, the output stage is fully compatible with all TTL and CMOS logic requirements. Texas Instruments’ LinCMOS™ process offers superior analog perform...