DatasheetsPDF.com

TLC27L1A Dataheets PDF



Part Number TLC27L1A
Manufacturers Diodes
Logo Diodes
Description CMOS LOW POWER OPERATIONAL AMPLIFIERS
Datasheet TLC27L1A DatasheetTLC27L1A Datasheet (PDF)

New Product TLC27L1, TLC27L1A, TLC27L1B CMOS LOW POWER OPERATIONAL AMPLIFIERS Description The TLC27L1 operational amplifier combines a wide range of input offset-voltage grades with low offset-voltage drift and high input impedance. The TLC27L1 is a low-bias version of the TLC271 programmable amplifier. Pin Assignments Three offset-voltage grades are available, ranging from the low-cost TLC27L1 (10mV) to the TLC27L1B (2mV) low-offset version. The devices are offered in both commercial and in.

  TLC27L1A   TLC27L1A


Document
New Product TLC27L1, TLC27L1A, TLC27L1B CMOS LOW POWER OPERATIONAL AMPLIFIERS Description The TLC27L1 operational amplifier combines a wide range of input offset-voltage grades with low offset-voltage drift and high input impedance. The TLC27L1 is a low-bias version of the TLC271 programmable amplifier. Pin Assignments Three offset-voltage grades are available, ranging from the low-cost TLC27L1 (10mV) to the TLC27L1B (2mV) low-offset version. The devices are offered in both commercial and industrial operating temperature ranges. The extremely high input impedance and low bias currents, in conjunction with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs. The devices also exhibit low-voltage single-supply operation, with a common-mode input-voltage range including the negative rail. Features  Wide range of supply voltages over specified temperature range: 0°C to +70°C . . . 3 V to 16 V –40°C to +85°C . . . 4 V to 16 V  Single-Supply Operation  Common-Mode Input Voltage Range Extends Below the Negative Rail  Low Noise: 68nV/√Hz typical @ f = 1kHz  Output Voltage Range Includes Negative Rail  High Input Impedance  Designed-In Latch-Up Immunity  Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3) Applications The TLC27L1 is the low power version of the TLC271. It offers low power for applications requiring long battery life. For applications that require more performance consider the TLC271. The TLC27L1 is well suited to many consumer audio, industrial and other low power applications. Consider carefully the bandwidth and slew rate requirements for a specific application.  Audio Microphone Preamplifier Filtering – Equalizers Signal Amplification  Industrial Power Supply Instrumentation Metering  Medical Portable Meters and Measurement Instrumentation Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, “Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. TLC27L1, TLC27L1A, TLC27L1B Document number: DS35398 Rev. 2 - 2 1 of 27 www.diodes.com November 2014 © Diodes Incorporated TLC27L1, TLC27L1A, TLC27L1B Ordering Information Device TLC27L1CS-13 TLC27L1ACS-13 TLC27L1BCS-13 TLC27L1IS-13 TLC27L1AIS-13 TLC27L1BIS-13 Package Code S S S S S S Offset Voltage 10mV 5mV 2mV 10mV 5mV 2mV Operating Temperature Range 0 to +70°C 0 to +70°C 0 to +70°C -40 to +85°C -40 to +85°C -40 to +85°C Packaging (Note 4) SO-8 SO-8 SO-8 SO-8 SO-8 SO-8 13” Tape and Reel Quantity Part Number Suffix 2500/Tape & Reel -13 2500/Tape & Reel -13 2500/Tape & Reel -13 2500/Tape & Reel -13 2500/Tape & Reel -13 2500/Tape & Reel -13 Note: 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Pin Descriptions Pin Name OFFSET N1 ININ+ GND OFFSET N2 OUT VDD VDD Pin Number 1 2 3 4 5 6 7 8 Description Offset Control Inverting Input Inverting Input Non-Inverting Input Ground Offset Control Non-Inverting Input Output Supply Supply TLC27L1, TLC27L1A, TLC27L1B Document number: DS35398 Rev. 2 - 2 2 of 27 www.diodes.com November 2014 © Diodes Incorporated Absolute Maximum Ratings (Notes 5, 6, 7, 8, 9) TLC27L1, TLC27L1A, TLC27L1B Symbol Parameter Rating Unit VDD VID VIN IIN IO PD TA TJ TST ESD HBM Supply Voltage: (Note 6) Differential Input Voltage (Note 7) Input Voltage Range (either input) Input Current Output current Output Short-Circuit to GND (Note 8) Power Dissipation (Note 9) Operating Temperature Range C Grade I Grade Operating Junction Temperature Storage Temperature Range Human Body Model ESD Protection (1.5kΩ in series with 100pF) 18 V ±VDD V -0.3 to VDD V ±5 mA ±30 mA Continuous  1065 mW 0 to +70 °C -40 to +85 150 °C -65 to +150 °C 1.5 kV Notes: 5. Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only; functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 6. All voltage values, except differential voltages, are with respect to ground. 7. Differential input voltages are at IN+ with respect to IN-. 8. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipat.


TLC27L1 TLC27L1A TLC27L1B


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)