Dual Channel USB3.0 Redriver/Equalizer
SN65LVPE502
www.ti.com
SLLSE29 A – APRIL 2010 – REVISED FEBRUARY 2012
Dual Channel USB3.0 Redriver/Equalizer
Check for...
Description
SN65LVPE502
www.ti.com
SLLSE29 A – APRIL 2010 – REVISED FEBRUARY 2012
Dual Channel USB3.0 Redriver/Equalizer
Check for Samples: SN65LVPE502
FEATURES
1
Single Lane USB 3.0 Equalizer/Redriver Selectable Equalization, De-emphasis and
Output Swing Control Integrated Termination Hot-Plug Capable Receiver Detect Low Power:
– 315mW(TYP), VCC = 3.3V Auto Low Power Modes:
– 5mW (TYP) When no Connection Detected – 70mW (TYP) When in U2/U3 Mode
Excellent Jitter and Loss Compensation Capability: to 24" – 24" of 6 mil Stripline on FR4 – 12" on Input and 4m, 26AWG USB 3.0 Cable on Output
Small foot print – 24 Pin (4mm × 4mm) QFN Package
High Protection Against ESD Transient – HBM: 5,000 V – CDM: 1,500 V – MM: 200 V
APPLICATIONS
Notebooks, Desktops, Docking Stations, Backplane and Cabled Application
DESCRIPTION
The SN65LVPE502 is a dual channel, single lane USB 3.0 redriver and signal conditioner supporting data rates of 5.0Gbps. The device complies with USB 3.0 spec revision 1.0, supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.0 power management modes.
Programmable EQ, De-Emphasis and Amplitude Swing
The SN65LVPE502 is designed to minimize signal degradation effects such as crosstalk and inter-symbol interference (ISI) that limits the interconnect distance between two devices. The input stage of each channel offers selectable equalization settings that can be programmed to match loss in the channel. The differential output...
Similar Datasheet