Configurable Memory
PSD935G2
Configurable Memory System on a Chip for 8-Bit Microcontrollers
PRELIMINARY DATA
FEATURES SUMMARY s 5 V±10% Si...
Description
PSD935G2
Configurable Memory System on a Chip for 8-Bit Microcontrollers
PRELIMINARY DATA
FEATURES SUMMARY s 5 V±10% Single Supply Voltage: s Up to 4 Mbit of Primary Flash Memory (8
uniform sectors) s 256Kbit Secondary Flash Memory (4 uniform
sectors) s Up to 64 Kbit SRAM s Over 3,000 Gates of PLD: DPLD s 52 Reconfigurable I/O ports s Enhanced JTAG Serial Port s Programmable power management s High Endurance:
– 100,000 Erase/Write Cycles of Flash Memory – 1,000 Erase/Write Cycles of PLD
Figure 1. Packages
TQFP80 (U)
January 2002
1/3
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
PSD9XX Family
PSD935G2
Configurable Memory System on a Chip for 8-Bit Microcontrollers
1.0 Introduction
The PSD9XX series of Programmable Microcontroller (MCU) Peripherals brings
In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a
simple and flexible solution for embedded designs. PSD9XX devices combine many of the
peripheral functions found in MCU based applications:
4 Mbit of Flash memory A secondary Flash memory for boot or data Over 3,000 gates of Flash programmable logic 64 Kbit SRAM Reconfigurable I/O ports Programmable power management.
1
PSD9XX Family
1.0 Introduction
(Cont.)
2
PSD935G2
The PSD935G2 device offers two methods to program PSD Flash memory while the PSD is soldered to a circuit board.
t In-System Programming (ISP) via JTAG
An IEEE ...
Similar Datasheet