MSP430G2755

www.ti.com MSP430G2955 MSP430G2855 MSP430G2755 SLAS800 – MARCH 2013 MIXED SIGNAL MICROCONTROLLER Check for Samples: MSP430G2955, MSP430G2855, MSP430G2755 FEATURES 1 Low Supply-Voltage Range: 1.8 V to 3.6 V Ultra-Low Power Consumption – Active Mode: 250 µA at 1 MHz, 2.2 V – Standby Mode: 0.7 µA – Off Mode (RAM Retention): 0.1 µA Five Power-Saving Modes Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time Basic Clock Module Configurations – Internal Frequencies up to 16 MHz With Four Calibrated Frequency – Internal Very-Low-Power Low-Frequency (LF) Oscillator – 32-kHz Crystal – High-Frequency (HF) Crystal up to 16 MHz – External Digital Clock Source – External Resistor Two 16-Bit Timer_A With Three Capture/Compare Registers One 16-Bit Timer_B With Three Capture/Compare Registers Up to 32 Touch-Sense-Enabled I/O Pins Universal Serial Communication Interface (USCI) – Enhanced UART Supporting Auto Baudrate Detection (LIN) – IrDA Encoder and Decoder – Synchronous SPI – I2C™ On-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sampleand-Hold, and Autoscan Brownout Detector Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse Bootstrap Loader On-Chip Emulation Logic Family Members are Summarized in Table 1 Pa...