Low power dual voltage comparators
LM193W, LM293W, LM393W
Low power dual voltage comparators
Features
■ Wide single supply voltage range or dual supplies:...
Description
LM193W, LM293W, LM393W
Low power dual voltage comparators
Features
■ Wide single supply voltage range or dual supplies: +2 V to +36 V or ±1 V to ±18 V
■ Very low supply current (0.4 mA) independent of supply voltage (1 mW/comparator at +5 V)
■ Low input bias current: 25 nA typ
■ Low input offset current: ±5 nA typ
■ Low input offset voltage: ±1 mV typ
■ Input common-mode voltage range includes ground
■ Low output saturation voltage: 250 mV typ. (Io = 4 mA)
■ Differential input voltage range equal to the supply voltage
■ TTL, DTL, ECL, MOS, CMOS compatible outputs
■ ESD internal protection: 2 kV
Description
These devices consist of two independent low voltage comparators designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible.
These comparators also have a unique characteristic in that the input common-mode voltage range includes ground even though operated from a single power supply voltage.
All the pins are protected against electrostatic discharge up to 2 kV. As a consequence, the input voltages must not exceed the magnitude of VCC+ or VCC-.
DIP8 (Plastic package)
SO8 (Plastic micropackage)
TSSOP8 (Thin shrink small outline package)
Pin connections (Top view)
1 - Output 1 2 - Inverting input 1 3 - Non-inverting input 1 4 - VCC5 - Non-inverting input 2 6 - Inverting input 2 7 - Output 2 8 - VCC+
December 2008
Rev 2
1/15
www.st.com
15
Schematic diagram
1
Schematic diagram
LM193W, LM29...
Similar Datasheet