DMOS audio amplifier
TDA7293
120-volt, 100-watt, DMOS audio amplifier with mute and standby
Features
Multipower BCD technology Very high...
Description
TDA7293
120-volt, 100-watt, DMOS audio amplifier with mute and standby
Features
Multipower BCD technology Very high operating voltage range (±50 V) DMOS power stage High output power (100 W into 8 Ω
@ THD =10%, with VS = ±40 V) Muting and stand-by functions No switch on/off noise Very low distortion Very low noise Short-circuit protected (with no input signal
applied) Thermal shutdown Clip detector Modularity (several devices can easily be
connected in parallel to drive very low impedances)
Description
The TDA7293 is a monolithic integrated circuit in Multiwatt15 package, intended for use as audio
Multiwatt15V
Multiwatt15H
class AB amplifier in Hi-Fi field applications, such as home stereo, self powered loudspeakers and Topclass TV. Thanks to the wide voltage range and to the high output current capability it is able to supply the highest power into both 4-Ω and 8-Ω loads.
The built-in muting function with turn-on delay simplifies the remote operation avoiding on-off switching noises.
Parallel mode is possible by connecting several devices and using pin11. High output power can be delivered to very low impedance loads, so optimizing the thermal dissipation of the system
Table 1. Device summary
Order code
Package
TDA7293V
Multiwatt15V
TDA7293HS
Multiwatt15H
Figure 1.
TDA7293 block diagram
C7 100nF
+Vs C6 1000µF
VMUTE VSTBY
R3 22K
C2 22µF
R2 680Ω
IN- 2
C1 470nF IN+ 3
R1 22K
SGND 4 (**)
+Vs +
R5 10K R4 22K C3 10µF
MUTE 10 STBY ...
Similar Datasheet