MICROPOWER SINGLE OPERATIONAL AMPLIFIERS
TLV2711, TLV2711Y
Advanced LinCMOS RAIL-TO-RAIL MICROPOWER SINGLE OPERATIONAL AMPLIFIERS
SLOS196A – AUGUST 1997 – REVIS...
Description
TLV2711, TLV2711Y
Advanced LinCMOS RAIL-TO-RAIL MICROPOWER SINGLE OPERATIONAL AMPLIFIERS
SLOS196A – AUGUST 1997 – REVISED MARCH 2001
D Output Swing Includes Both Supply Rails D Low Noise . . . 21 nV/√Hz Typ at f = 1 kHz D Low Input Bias Current . . . 1 pA Typ D Very Low Power . . . 11 µA Per Channel Typ D Common-Mode Input Voltage Range
Includes Negative Rail
D Wide Supply Voltage Range
2.7 V to 10 V
D Available in the SOT-23 Package D Macromodel Included
description
The TLV2711 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 µA (typ) of supply current and is ideal for battery-power applications. Looking at Figure 1, the TLV2711 has a 3-V noise level of 21 nV/√Hz at 1 kHz; five times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2711 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.
DBV PACKAGE (TOP VIEW)
OUT
1
5
VDD–/GND
VDD+
2
IN +
3
4
IN–
EQUIVALENT INPUT NOISE VOLTAGE† vs
FREQUENCY
80
VDD = 3 V
70
RS = 20 Ω
TA = 25°C
60
50
40
30
20
Vn – Equivalent Input Noise Voltage – nV/ Hz
The TLV2711, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work ...
Similar Datasheet