Rail-to-Rail MicroPower Single Operational Amplifiers
TLV2211, TLV2211Y Advanced LinCMOS RAILĆTOĆRAIL MICROPOWER SINGLE OPERATIONAL AMPLIFIERS
SLOS156E − MAY 1996 − REVISED ...
Description
TLV2211, TLV2211Y Advanced LinCMOS RAILĆTOĆRAIL MICROPOWER SINGLE OPERATIONAL AMPLIFIERS
SLOS156E − MAY 1996 − REVISED SEPTEMBER 2006
D Output Swing Includes Both Supply Rails D Low Noise . . . 21 nV/√Hz Typ at f = 1 kHz D Low Input Bias Current . . . 1 pA Typ D Very Low Power . . . 11 µA Per Channel Typ D Common-Mode Input Voltage Range
Includes Negative Rail
D Wide Supply Voltage Range
2.7 V to 10 V
D Available in the SOT-23 Package D Macromodel Included
description
The TLV2211 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 µA (typ) of supply current and is ideal for battery-power applications. Looking at Figure 1, the TLV2211 has a 3-V noise level of 22 nV/√Hz at 1kHz; 5 times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2211 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.
DBV PACKAGE (TOP VIEW)
IN + 1 5
VDD+
VDD− /GND
2
IN −
3
4
OUT
EQUIVALENT INPUT NOISE VOLTAGE† vs
FREQUENCY
80
VDD = 3 V
70
RS = 20 Ω
TA = 25°C
60
50
40
30
20
Vn − Equivalent Input Noise Voltage − nV/ Hz
The TLV2211, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work wel...
Similar Datasheet