Low-Power Op Amps
ą
TLV225x, TLV225xA
Advanced LinCMOS RAILĆTOĆRAIL
VERY LOWĆPOWER OPERATIONAL AMPLIFIERS
SLOS185D − FEBRUARY 1997 − ...
Description
ą
TLV225x, TLV225xA
Advanced LinCMOS RAILĆTOĆRAIL
VERY LOWĆPOWER OPERATIONAL AMPLIFIERS
SLOS185D − FEBRUARY 1997 − REVISED AUGUST 2006
D Output Swing Includes Both Supply Rails D Low Noise . . . 19 nV/√Hz Typ at f = 1 kHz D Low Input Bias Current . . . 1 pA Typ D Fully Specified for Both Single-Supply and
Split-Supply Operation
D Very Low Power . . . 34 µA Per Channel Typ D Common-Mode Input Voltage Range
Includes Negative Rail
D Low Input Offset Voltage
850 µV Max at TA = 25°C
D Wide Supply Voltage Range
2.7 V to 8 V
D Macromodel Included
D Available in Q-Temp Automotive
HighRel Automotive Applications Configuration Control / Print Support Qualification to Automotive Standards
description
HIGH-LEVEL OUTPUT VOLTAGE
The TLV2252 and TLV2254 are dual and quadruple low-voltage operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range
vs HIGH-LEVEL OUTPUT CURRENT
3 VDD = 3 V
VOH − High-Level Output Voltage − V
in single- or split-supply applications. The
2.5
TLV225x family consumes only 34 µA of supply
current per channel. This micropower operation
TA = − 40°C
makes them good choices for battery-powered
2
applications. This family is fully characterized at
TA = 25°C
3 V and 5 V and is optimized for low-voltage
1.5
applications. The noise performance has been
dramatically improved over previous generations
TA = 85°C
of CMOS amplifiers. The TLV225x has a noise
1
level of 19 nV/√Hz at 1...
Similar Datasheet